cantilever load cell, shear beam load cell

This cantilever load cell can be used for floor scale, truck scale, balance, safe control system, trolley, Railway scale, bin scale, batching scale. KEY WORD:cantilever load cell, alloy steel load cell, bending beam load cell, compression load cell, shear beam load cell,single ended beam load cell Description: Bending beam (cantilever) load cellcan be made of stainless steel or alloy steeland is hermetically sealed . This is suitable for weighing and force measuring applications. It is strain gage based load cell which is fully temperature compensated over-30 to70 deg. C. It exhibits good linearity and very low hysteresis and creep. Capacity 0.5,1,2T (Creep(after 5 mins)0.02 %F.S. Combined error 0.02 %F.S Input resistance400±10 Ω(ohms) Output resistance352±2 Ω(ohms) Insulation resistance ≥5000 MΩ Temp. Effect on Zero±0.02%F.S/10degree Temp. Effect ON Span ±0.02%F.S/10degree Operating Temp Range -30+70 Safe load limit 150 %F.S Lateral load limit300 %F.S Maximum excitation 15VDC Protection Class IP67 Material Alloy steel Load cell size:137*36.6*34.5MM Cable Length:2.6M Cable diameter:φ6mm