Calcium Silicate Board Production Line

Calcium Silicate Board Descriptions With the raw materials like silicon materials(quartz power, diatomite), calcium materials(concrete, lime) and reinforced fiber(pulp fiber, glass fiber, plaster), its a light weight board with the processes of slurry making, shaping, steam curing and surface sanding. With its outstanding capabilities, its rapidly promoted and applied. As one kind of wall material, its quite convenient when replacing fireclay brick and surface decoration. And the special characteristic is durability, high intension, long life-span and anti-moisture. Calcium Silicate Boards PerformanceHealthy and Eco-friendly: free from asbestos and other harmful fibres, nontoxic, non-radioactive. Fireproof and anti-moisture: The test result is Non-burnt A level based on GB8624, and it will not burn when fire occurs or produce any toxic gas. And it will not bend or crack or rot in any moisture conditions. Superior economy: Compared to traditional heat-insulation wall, it has prominent advantage in cost performance. Heat-insulation and anti-rot: Low thermal conductivity with good thermal-insulation and heat-preservation capabilities. And it can resist the erodibility of industrial liquor and can be widely used in chemical and weaver print. Good sound-insulation: With good sound absorbing, it can be an ideal decorative material for partition wall or ceiling. High intension: Its highly intensive, anti-striking and good nail-holding performance. Calcium Silicate board at 6mm thick is much stronger than the paper-surface plasterboard at 9.5mm thick. Wide compatibility: The surface can be doped with various coatings. Wallpaper and ceramics can be stuck to it to get perfect decorative effect. Technical Data Name Calcium Silicate Board Production LineMain machine weight140TTotal power800KWWorking area3000Product spec2440×1220×3-15mmWorking speed500/ hour