Cable Accessories

Cable Accessories Busbar board Be used with cable junctions, can be combined into multiple cable inlet and outlet, connectors can be reserved by insulated protective cap. There are two types of busbar boards distinguished by different currents, one is 200A and the other one is 600A. Moreover, the product has connection type of two-phase, threephase and four-phase. Elbow connector The rated current for this product is 200A and the size of the cables to be connected is from 35 to 120 mm2. The conductor pole has the function of arc extinction; it can be used as load break switch for the systems with a current of 200A or below, which can also be connected with fault indicator or charge indictor to quickly identify or locate the fault position or monitoring circuit status. The product is installed at busbar board and T---cable connector for a rated current of 200A, which is also widely applied at substations, ring main units and other equipments connections. T-Junction Cable accessory Product can be used as the connectors of loop circuit and connected to busbar board, ring main switchgears and substations for a required current of 600A. T-II Cable Connector As the main connectors of loop circuit of 600A, the elbow connector can be plugged at the tail of the product increasing the numbers of cable connections. Connecting Plug As the link between T-cable connectors (T---cable connectors), it composes the T cable programmer at the current of 600A. Load Transfer Connector Used as the adapter for the connections between busbar board at a required current of 600 A and elbow connector at a required current of 200A. Single-Phase Bushing Connector It can be used as the connectors between American style substations high-voltage bushing socket and elbow connectors; it can also be used as the current transferring connecting parts between the current of 600A and 200A. Single-phase Connector (Mount) T-Junction connector and Elbow connector can be hanged to singlephase connector during systems- maintenance. There are two types of Single-phase connector for different systems with current of 200A and 600A. Insulated Protective Cap It is used at the reserved busbar-board's connectors, or used to seal the unplugged elbow connector or T-Junction connectors during system maintenance. There are two types of insulated protective cap for systems with different currents of 200A and 600A. Two-Phase Bushing Connector Plugged into zinc oxide surge arrester or be used to increase the numbers of connections. Charged Indicator The LED indicator blinks at rated frequency to indicate that the circuit is charged. Zinc oxide surge arrester It can be installed directly on the substation, Ring Main Unit, cable sector and other electrical equipment to provide over-voltage protection.