bronze bushing

WZB FB-090 is a kind of bushes wrapped by bronze strip. The bronze is of particular formulation with high specific gravity and on its surface may be incorporated with spherical of diamond shaped indentations or oil grooves as required by customers. It is of high load capacity and long life. In place of traditional bronze bush, it is more cheap and more compact. It is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machine tools and some mineral engines. Base material: CuSn8P0.3 Hardness: HB90 120 Load capacity: 75N/mm2 Temperature: -80 200°C Speed limit: 2.5m/s PV limit (Oil): 16N/mm2. m/s WZB FB-092 bronze bushing is based on bronze CuSn8.3P0.3 and evenly distributed drilling oil hole on its body. When in assembly, oil or grease should be stored in the holes before bushing is sealed from both ends. FB092 has the advantages of abundant oil storage, easy-to-assembly, machine compactness etc. It can replace the conventional whole copper sleeves thus to save much cost. It is mostly applied under middle load, low speed such as in convey machine, hoisting machine, windlass, aligning machine etc. Base material: CuSn8P0.3 Hardness: HB90 120 Load capacity: 60N/mm2 Temperature: -100 200 °C Speed limit: 2.5m/s PV LIMIT(OIL): 16N/mm2. m/s