board to board connector

Components:rubber core and terminals . Raw materials :copper and plastic components Purpose:Cellular phones,PHS and Digital AV apparatus. Pin numbers:24Pin,34Pin,44Pin,50Pin,54Pin,60Pin,70Pin Features: 1.KEC-unique S-shaped spring is adopted for the spring structure,while realizes 1.0mm in stacking height. 2.Because no part of pins were exposed owing to the bottom wall of the connector in spite of its slim and low profile,a pattern can be laid between lands of tails rows,which enables less limited pattern layouts on boards. 3.The pinching structure,highly resistant to vibration and drop shock is adopted in contacts and the original structure excluding splashed flux or foreign matters attached is adopted on contacting points in order to obtain high contacting reliability. 4.'Fine locking mechanism 'adopted for mating structure realizes the nice clicking response and firm retention force aganist unmating despite of the ultra low profile. 5.A checker connector to be mated with a connector is also available to check electrical continuity or short circuit of the connector. Specifications: Stacking Height1.0mmPitch0.4mmNo.of Positions10 80Rated CurrentAC/DC 0.3ARated VoltageAC/DC 50VD.W.VoltageAC 250Vrms/minOperating Temperature-40 85°c