Biogas tankassembled with porcelain enamel platesThe tank body of the anaerobic biogas digester is made up of advanced prefab enameled plates, assembled with bolts on the spot in a fast and low energy consuming way, which realizes the purpose of rationalizing the configuration of the main biogas equipments, maximizing its excellent performance, finishing it shortly, and maintaining it conveniently. The tank body can be taken apart into pieces for long-distance transportation. The anaerobic biogas digester assembled with enameled plates is developed by our company by taking many types of anaerobic biogas digesters’ advantages both home and abroad into account, and has been put into operation in more than 10 big biogas projects in China with great beneficial results rising.The physical characteristics of the anaerobic reactor's enamel coverColor: green (standard), or basing on the users’ demandThickness:0.25---0.45mm,cover on both sides.Acid and alcali resistant ability:The PH of the standard enamel cover: 3---11The PH of the special enamel cover: 3---11Adhesion: 3,450 N/cmElasticity:same as that of the painted steel plate, about 500kn/mmHardness:6.0(by Mohs)The direction for CSTR(continual stir tank reactor) technology: a churn-dasher is installed inside such kind of reactor to intermingle fermenting materials with microorganism. Compared with traditional reactors, bioactive sites are distributed in the whole reactor, so its efficiency has been obviously improved. It adopts a way of adding material continuously or at interval under permanent temperature, fitting for processing suspended solid material of high concentration. For example, wastewater treatment plant usually adopts such technology to process aerobic active sludge during anaerobic process.
Delivery terms and packaging
Unfortunately the seller did not specify the terms of delivery. For more information, contact the seller.