BF-38B Mechanical Grease Worker(for cone penetrati

BF-38B Mechanical Grease Worker (for Cone Penetration) 1. Performance and Characteristics Two sample can be tested at the same time; Automatic counting; Automatic stop; Show the number digitally; 60 times per minute; With a electronic counter that automatically shuts off the drive motor after any desired number of strokes up to 100000. 2. Technical ParametersWorking Power220VPower370WMovement60times/minMaximum number of movements100000 3. Structural Characteristics This instrument is a double acting reciprocating test equipment, which consists of motor, turbo reducer, eccentric mechanism, working device and the base, etc. The motor is horizontal single capacitor starting motor. Turbo reducer: A two-way output shaft reducer, transmission ratio is 25:1. At both ends of the turbine shaft reducer installed a pair of eccentric mechanism. Working device: installed on the base at both sides of the reducer and driven by the motor and eccentric mechanism. Work continuously with 60 times per minute. 4. Applicable Standard BF-38B is according to the standards of GB/T 269 and ASTM D217. It's for "worked penetration" and "prolonged worked penetration" tests to determine consistency of lubricating greases. Contact Mobile:(0086)139 4263 2309 Tel:(0086)0411-84754555-306 Fax:(0086)0411-84753759