Automatic pump control for water pumps

Automatic pump control for water pumps

original price: 9,00 USD
Ningbo, China
Production capacity:
2000 Piece / Day
Ningbo, China
Beginner
86-574-88428099
Edward Lee
Contact person

Basic Information

Place of Origin Guangdong China (Mainland)
Brand Name ANSHI
Model Number SK-14A
Max. Current 10A
Max. Voltage 240V
Automatic pumpcontrol for water pumps Descriptions: Start and stop water pump automatically according to the pressure and water storage 1. Rate voltage: 220-240V, 110-120V 2. Max. Current:10A 3. Frequency: 50HZ-60HZ 4. Max. power:1.1KW 5. Joint screw: G1 6. protection Garde: IP65 PC-13 7. starting pressure to choose:1.5bar or 2.2bar The product can replace the complicated installations of automatic water pump e.g. pressure gauge,pressure switch, T-valve, check valve and pressure tank). It has the features of stable performace, low maintenance and long life etc, it will indicate the pump has started when the green light Power on lights up after connecting the power. When the yellow light Pump on lights up, it indicates the pump has been started. The pump continues to operate for a few minutes enabling the system to fill in the pipes and to reach the required pressure. If this lapse is insufficient, the red light failure will light up. In this event, keep the Restart button pressed and wait, with a tap opened till the red light is off. Once released the button and closed the tap, the product will keep the pump at its maximum pressure.. Function: The product is designed especially for all control operation of automatic water pump. If the particular breakdowns occur, suction pipe etc, the product recognizes the breakdowns and the red light failure lights up,at the same a stop signal is sent to the pump to prevent damages caused by its working in the absence of water. Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing the restartbutton. The controller can ensure a constant pressure for the water supplying system and thus reduce the water hammer effect inside pipeline during water delivering. The controller also posesses the features of reset after power failure. Its starting flow is about 36-60L/h and is convenient for home application.

Delivery terms and packaging

Packaging Detail: Packing size 46.5*43*25cm/carton12pcs/carton Delivery Detail: delivery time: 30 days
Port: ningbo

Payment term

Letter of credit

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product