Automatic Flexo Printing Slotting Die cutting mach

Printing Slotting machineLead Edge Feeder of Sun Automation ( Optional)² The feeding unit open and lock up with printing unit motorized. The unit moves with alarm which to ensure the safety of operators.² The emergency stop device is equipped between each unit, which can be operated inside to ensure the safety of the operators.² The driving shaft is attached with friction clutch, which avoids damage from miss operation.² Pneumatically interlock device.² The protection device is equipped with the main motor.The main motor not be able to start when each unit is not locked.² The clearances of side guides, backstop and front gate adjust motorized. The adjusting data is readable on the panel.² Skip feeding and continuous feeding are both available (with feeding counter). ² The feeding counter sets and shows the number of the passed carton sheets.² The clean device with double brushes and vacuum absorption system will clear the impurity on the carton sheet so to promote the quality of printing.² The up feeding roller wrapped with durable rubber so to improve the friction, and with balance adjusting device.² The low feeding roller is embossed (improve the friction) and chrome-plated.² The clearance between feeding rollers adjusts motorized, adjustment data presets.² The feeding unit, printing unit, slotting unit and die-cutting unit zero return automatically.² The guide wheel wrapped with sulcate rubber so to improve the accuracy of feeding, and avoids the damage of the carton sheet.² The vacuum suction system helps feeding easily, which also applies to thin and crooked carton sheet.² Feeding journey adjustable to best match the size of the board so to minimize the pull pressure applied to the board.² Frequency conversion device adjusts the vacuum volume so to meet the different size of carton sheet.² The edge of the board is the reference line, reduces the mechanical error, the printing and slotting is more accurate.² Vacuum suction powder cleaner, roller brush rotary running to clean suction mouth, to clear away most of the dirt accumulated on the printing surface of the corrugated board to improve printing quality.Printing Unit² High quality material used for printing roller, its surface grinded and chromium plated.² Balance adjusted, running smoothly.² Fast printing rubber plate changing device.² There are step-switches in each printing unit to control the Printing Roller turning positively or reverse electrically, it is easy to assemble and disassemble the forme.² The printing pressing roller grinded and chromium plated.² The gaps between printing rollers be adjusted in computer.² The Netted Roller rises or descends pneumatically and interlocked with the feeding system (the Netted Ceramic Roller descends to contract with the forme when feeding, and rises to apart from the forme).² Planetary gear set can adjust the phase of forme automatically and accurately.² The printing phase fixing device: using the electromagnetism clutch arrester, when one unit is apart or adjusting the phase, the arrester can keep the rollers from turning and keep the gears in quondam locality.² The transversal position of the printing roller adjusted by electricity, the adjusting distance is20 mm totally.² The netted ceramic anilox roller whose surface is grinded, netted and chromium plated.² The squeegee: The steel pipe is covered wear-resisting rubber, well in transferring the ink.Motorized Slotter² The upper creasing wheel is covered rubber to avoid damaging of the board. ² Motorized adjustment of the gaps between creasing wheels, and the data is displayed on the dial.² Motorized transverse adjustment of the saddles of the slotting blades.² The slotting blade is made of high quality allay steel, heat treated and grinded. The edge of the slotting blade is in very sharp teeth shape and of high precision.² The gaps between the saddle of slotting blades is motorized adjustment, the data is displayed on computer.² Planetary gear set can adjust the slotting phase automatically and accurately. Pre-pressing Rollers will not so badly crack the paper. Rotary Die Cutting² The rubber mat roller is made of high quality material, the appearance is rubbing treated and chrome-plated.² Balance adjusted, running smoothly.² Manual adjustment of the die-cutting mould gap.² The rubber mat roller transverse adjustment within the scope of 40mm. ² The register adjustment system adopts planet gear construction.² The transverse adjustment is motorized.² Motorized 360o degrees micro adjustment of the die cutting.Auto Stacker ² Connection arm operated manually or automatically.² Tension of the transfer belt at the connection arm can be adjusted individually, no equal length restriction.² Strong chain and motor with brake control the transport bed, up to 1600mm height.² The transport bed automatically adjust its position according to the board stacking height, its motor with brake make the bed can fix on any position and not let it down.²