AUP PROP(Australia Market)

RIMMCA AUP PROPS (Australian type) welded by robot, produced according to AS3610 standard, carrying working-load capacity (8KN-25KN) at the different extension: 1.83meters, 2.80meters, 3.40meters, 3.975meters, and 4.90meter with Cold galvanization. COMPONENTS IN DETAIL: PROP HEAD: -150x150mm plates with holes for securing to timber beams or facilitating the use of accessories. PROP INNER TUBE: -48.0mm O.D, with holes at 152.5mm centers, tube diameter enables standard scaffold tube and couplers to be used for bracing purposes. PROP OUTER TUBE: -60.3mm O.D, bottom plate identical to prop head, reduction couplers enable standard scaffold tube to be connected to outer tube for bracing purposes. Welding quality: all welds to be neat, clean and full penetrating to AS/BS. Surface finishing: zinc coated SIZEClosedheightOpen heightEST weightLoadingcapacity(KN)AUP#0 PROP 1050mm 1830mm 13.80kg 25KN at height 1830mm AUP #1 PROP 1600mm 2800mm 18.20kg 14KN at height 2800mm AUP #2 PROP 1900mm 3400mm 21.00kg 12KN at height 3400mm AUP #3 PROP 2170mm 3975mm 23.60kg 9KN at height 3975mm AUP #4 PROP 3100mm 4900mm 30.50kg 8KN at height 4900mm Note: 1: limit state conversion factor=1.5(2) working load limits are applicable to props. 2: Refer AS3610 for acceptable criteria in installation of props and eccentricity of loading.