ASSIST-REDIRECTOR

Product instruction 1. The assist-redirector is suitable for different type of car steering wheel (in corresponding sizes). 2. The design of the production is humanity, it’s very practicability and ornament. 3. The production can overcome the inconsistent of the steering wheel and the control rod effectively when turning the corner or turning around and backing the car. 4. The more humanity of the structure design will not change the driving habit of the driver. 5. The anti-slide gasket can protect the steering wheel no being damage when fixing. Moreover, the anti-slide gasket can make it together between the assist-redirector and the steering wheel. Installation 1. Firstly, choose the proper position in the steering wheel base on personal driving habit. 2. Join the upper and nether hoop of the assist-redirector, put the anti-slide gasket into the inner side of the hoop, then nip the assist-redirector on the proper place which you have chosen in the first step. 3 .By cutting out the anti-slide gasket to adjust the tightness and looseness base on the unite of the hoop and the steering wheel. 4. Screw down the screw in suitable hole, not too tight or too loose. If too tight, it will damage the hoop. if too loose, it will affect control. Usage When controlling, you only need to press your palm of the hard on the top of the assist-redirector, use the aised part of the assist-redirector, forcibly to the direction which you want, it’s the same habit as usual on steering wheel one hand control, you will feel more easier and smoothly to control with the assist-redirector