Artistic Powder Coating

Features: Color All RAL colors are available to meet customer’s requirement Glossiness high-gloss, semi-gloss, low-gloss, matt Surface special finishes(texture, wrinkle, hammer, etc)for all kind of gloss Density 1.2-1.7g/cm3 Type Epoxy and polyester Storage The products should be stored in ventilated, dry and clean room with the temperature below 30.Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. On the condition mentioned above, the products can be stored stably for 12 months. Application hardware, gymnastic equipment, entertainment facilities, lighting, good stand, furniture, facilities, doors and safeties, industrial equipment Packing Inner packing: double PE bags Outer packing: 50ctns(1000kg)/pallet Net weight:20kg/ctn Technical indexes of powders: Appearance (visual) Homogeneous colour without any agglomerate Fineness(180mesh sieve residue) <0.5% Gel time 30-180S(200°C±2°C) Curing condition 180°C/15min Fused flowability(mm) 22-35mm(180°C) Average coverage rate 9.8-13.8m2/kg(60μm) Properties of coating film: StandardsHigh glossmattVein&mattFilm appearance By naked eyesSmooth and uniformSmooth and uniformSmooth and uniformFilm thickness ISO236060-80μm60-80μm80-120μmGloss 60° ISO281380-95%15-25%can not be measuredImpact resistance ASTM D2794GB/T1732-199350Kg50Kg50KgPencil hardness ASTM D3363GB/T6739-1996HHcan not be measuredAdhesion(cross cut) ISO2409GB/T9286-19980 grade(1mm6×6)0 grade(1mm6×6)0 grade(1mm6×6)Flexibility ASTM D5221/81/81/8Cupping test ISO1520GB 9753-1988≥5mm≥3mm≥3mmBend test ISO1519GB/T6742-1986≤5≤10≤10Color difference No obvious color differenceNo obvious color differenceNo obvious color differenceSalt spray test ISO9227GB/T1771-1991>500>500>500Humid heat resistance ISO6270-1GB/T1740-1979>500>500>500Alkali resistance 10%NaOH240 hour240 hour240 hourHeat resistance 200°C1hour1hour1hour Notice: Aviod inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible. This technical date is only for user to reference, in case of the problem can not be solved, please contact the technology department of our factory.