Anti-Corrosion Powder Coating

Features: Color All RAL colors are available to meet customer’s requirement Glossiness high-gloss, semi-gloss, low-gloss, matt Surface Smooth and special finish(texture, wrinkle, hammer, etc)for all kind of gloss Density 1.3-1.8g/cm3 Type Epoxy, polyester, epoxy-polyester Storage The products should be stored in ventilated, dry and clean room with the temperature below 30.Not to be close to fire and heat and kept out direct sunlight. Outdoor stacking is prohibited. On the condition mentioned above, the products can be stored stably for 12 months. Application electrical appliances, car spare parts,metal furniture, hospital equipment, camping accessories Packing Inner packing: double PE bags Outer packing: 50ctns(1000kg)/pallet Net weight:20kg/ctn Technical indexes of powders: Appearance (visual) Homogeneous colour without any agglomerate Fineness(180mesh sieve residue) <0.5% Gel time 30-180S(200°C±2°C) Curing condition 180°C/15min Fused flowability 22-35mm(180°C) Average coverage rate 8.4-10.8m2/kg Properties of coating film: StandardsPropertiesFilm appearance By naked eyesSmooth and uniformFilm thickness ISO236060-80μmGloss 60° ISO28132-95°Impact resistance ASTM D2794GB/T1732-199350KgPencil hardness ASTM D3363GB/T6739-19962HAdhesion(cross cut) ISO2409GB/T9286-19980 grade(1mm6×6)Flexibility ASTM D5221/8Cupping test GB 9753-1988≥6mmBend test ISO1519GB/T6742-1986≤3Color difference No obvious color differenceSalt spray test ISO9227GB/T1771-1991>500Humid heat resistance ISO6270-1GB/T1740-1979>500weather resistance EN20105-A02≥4 Notice: Aviod inbreathing dust when using the products though the powder coatings are nontoxic. The operations are suggested to wear protective glasses and respirators.Avoid long-term skin touch with the powder if possible. This technical date is only for user reference, the concrete index is to measure incomes under the terms of Suring, in case of the problem can not be solved, please contact the technology department of our factory.