Aluminum rod

1. Standard Producing and supplying the aluminum rod according to Chinese standard BG/T3954-2001 American standard ASTM B233:1997,German DIN standard EN17152:1997 2. Type,condition and range Type Condition Range(mm) A O Φ9-20A2 A4 A6 A8 H/R 3. Mechanical and electrical characteristic TypeTensile Strength(Mpa)Elongation(%)Max. Resistivity at 20(nΩ≤)A60-802527.55A280-1101227.85A495-1151028.01A6110-130828.01A8120-150628.01 4. Component Name of elementSiFeCuV+Ti+Mn+CrOtherAlPercentage≤0.110.250.010.020.03≥99.6Note:If the mechanical characteristic and electric characteristic of the aluminum rod are in accordance with the standard,the test of chemical elements contained may not be included in the final inspection. 5. Deviation of diameter DiameterDeviationMax. OralityΦ9-12±0.50.9Φ12.5-20±0.71.2 6. The quality of surface (1).The surface of aluminum rod should be neat and well-distributed in dimension. (2). The surface of aluminum rod should be clean without wrinkles,wrong roundness,cracks,impurity,twists and other defects affecting using,but slight mechanical scratches,little speckles,are permitled. Note:Standard specification for aluminum 1350 drawing stock for electrical purposes.TABLE 1 Tensile property limits Temper Tensile strengthksiMPa1350-O8.5-1459-971350-H12 and H2212-1783-1171350-H14 and H2415-20103-1381350-H16 and H2617-22117-152 TABLE 2 Electrical resistivity limits Temper Max. Resistivity(Ω/MM2)Min. Conductivity(% IACS)1350-O0.02789961.81350-H12 and H220.02803561.51350-H14 and H240.02808061.41350-H16 and H260.02812661.3