aluminum honeycomb panel

aluminum honeycomb panel(1)Brief introduction The idea of manufacture the aluminum honeycomb panel is from the honeybee, In the natural. The honeybee uses the least beeswax in building it's commodious,steady and firm honeycomb. We compose aluminum honeycomb-core and two aluminum sheets that composite on each side of the core. With special glue and produced light but strong aluminum honeycomb panel, We coated on the outside surface of the sheets. Since the air between the sheets is separated to holes sealed, the propagation of heat and sound wave are greatly restricted. So the panel is good at heat preservation and sound insulation. In the past time the aluminium honeycomb panel is just used in the field of aviation, in recent years with the development of economy. It is used in civil field step by step for example in the decoration of building, vehicle and ship's wallboard or partition and so on. The aluminium honeycomb panel of our company is mainly used in the outside and indoor decoration of building, as the partition or wallboard etc. (2)Classify According to the lacquer of Coating: A. PVDF B. Polyester (3)Specification A. General sizeunit: mm Length1000-5000 Width1220-1500 Thickness6.0, 10.0, 15.0, 20.0, 25.0B. If you need special specification, please tell us.C. The specification expression of the panel Length*Width*face sheet coating code and thickness (type) Example: Length: 2440mm, width: 1220mm,thickness:6.0mm,PVDF(FC)coating Code: 2440*1220*F6.0 Length: 3200mm, width: 1250mm,thickness: 25.0mm, PET coating Code: 3200*1250*P25.0