alcohol hand sanitizer dispensers

alcohol hand sanitizer dispensers& automatic hand disinfector KP0318 Functions: Spray direct on skin, disinfection is complete function for 30 seconds, can kill 99.6% of the bacteria on skin surface, sustainable 5 hours to curb the germs, no stimulation to the skin, and without allergic reaction, Volatilizes quickly, exemption from drying, rinse, napkins and towel dry, good effect of disinfection with low expenses. Product characteristics: Infrared sensor: a small electrical appliances, a realization of different liquid cleaning products, without contact, automatic out .The liquid adopts precision of integrated circuits, high-tech paste technology, unique mechanical structure, open fluid interface and integration of European fashionable design, let you from "push" take over crowded, and traditional liquid instead of plastic containers, with hand fluid sensor. Product advantage The green environmental protection products: ultra-low power consumption, 4 3 alkaline battery can use 10,000 times, or provide 200 days standby time. Microcomputer chip control, strong anti-jamming capability, and correct operation. Flow adjustable: more convenient and more economical. Ultra-thin streamline design: the more beautiful, save space. Application: used for star above hotel, high-grade office buildings, public, entertainment and decorate luxurious family and hospital etc. Appearance style, high-grade, beautiful, liquid supply convenient, internal structure is more perfect. Installation method: 1. Fixed hole position in the installation position. And drill a hole with the diameter of 3-6MM, fixed with the rubber plug and screws. 2. Face fixed disinfector slot with fixed screw, insert from bottom to up. Method of use: 1. Open the machine, put disinfectant into it, closed the former shell. Power-on reset: indictor bright for 1s, said machine self-inspection normal. 2. Normal scans: indicator flash at every 1.6S (8MS), that machine is in normal scans (infrared sensor continuously scanning with the interval of 800MS. 3. Induction to human signal: (1) First detect the position of switch stall (left, right.) (2) If in the left, gear motor driving a one-line, spray once. (3) If in the right file, motor drive spray once, 700MS delay, after testing scanning time, if induction human body, make a second injection. (4) Motor cycle (a complete movement once or twice by switching to evacuate, system delay 2s to evacuate, then re-enter the scanning cycle. If human is still not evacuated after 2S, the red light will continuous high-strobe with 40MS interval, until the body evacuated, during high-strobe, the motor will not drive jet., in order to save disinfectant. 4. Fault alarm: if the system mechanical transmission parts is damaged, red light will make slow low-frequency flashing warning with the interval of 1s, after failure for 5s. 5. This system software, a built-in correction for long-term stable job, when the battery runs out, will slow or does not reach the designated position, you need replace batteries. 6. When the red lights flashing for a long time, please replace the new battery. 7. The new battery replacement method: open the battery lid, hand battery replacement battery box, pull out a new battery, the battery using 3rd. 8. Put the key on the cover lock, counter-clockwise, then lock body, vice verse can open it. Technical parameters: Voltage: 6V DC voltage Capacity: 750ML Induction distance: 3-6CM Fluid volume: 2-3ML/times