Air cooling ceramic heaters with air blowers

Description This Ceramic heater with cooing effects is mianlyused for complete extrusion parts. It consists of several heaters connected with temperature reducing systems. Depending on specific application requirements, the number and layout of this item can be combined into one system. As the extrusion cylinder is completely covered, it has a uniform temperature flow. Also due to the enlarged surface of heating radiation, the efficiency is improved.It can remove friction heat from extrusion. It consists of several band heaters connected with ceramic fins for heat dispersion. Then the set is covered by an individual mounted cooling jacket with a fan connection box and air outlet device fixed. In addition, the band heater can be removed and replaced. The maximum temperature the heater can stand is 500 °C. Currently, this heater is the most advanced cooling & heating device for extrusion machine and cylinder of injection plastic machine. This type of heater is recommended to customers who demand heaters with highest quality-price ratio. Table ModelExtr ModelZone #Dimension (mm)Voltage(V)Power(W)LK-FQTC-Φ250X255Twin-screw 581Φ250X2553X4008000LK-FQTC-Φ200X1753Φ200X1752302400LK-FQTC-Φ152/Φ140X3104Φ152/Φ140X3102303600LK-FQTC-Φ305X295Twin-screw 681Φ305X2953X4001000LK-FQTC-Φ245X2153Φ245X2152303540LK-FQTC-Φ165/Φ185X3654Φ165/Φ185X3652304600LK-FQTC-Φ217X190Twin-screw 451Φ217X1902304000LK-FQTC-Φ123X2203Φ123X2202302600LK-FQTC-Φ375X345Twin-screw 801Φ375X3453X40016000LK-FQTC-Φ215/Φ195X4304Φ215/Φ195X4302305930LK-FQTC-Φ350X360Twin-screw 921Φ350X3603X40018000LK-FQTC-Φ250X2905Φ250X2903X4004200LK-FQTC-Φ250/Φ210X5106Φ250/Φ210X5103X4008600LK-FQTC-Φ75X162Single-screw 25Φ75X1622301400LK-FQTC-Φ90X220Single-screw 30Φ90X2202301500LK-FQTC-Φ130X280Single-screw 45Φ130X2802302200LK-FQTC-Φ140X325Single-screw 60Φ140X3252304000LK-FQTC-Φ150X420Single-screw 75Φ150X4204005000LK-FQTC-Φ175X460Single-screw 90Φ175X4604007000LK-FQTC-Φ200X550Single-screw 120Φ200X55040012000 Order Guide Please specify the following when ordering: The accurate inner diameter (mm) of heaters (specify the tolerance zone if applicable)Voltage and power densityThe position and size of the hole for connecting thermocouple OR of the incision.Wiring type and positionWhether need air blowersContent of the laser stamping on the sheath of heaters if neededOrder quantityDelivery date* It’s better to provide us with the drawings/picturesc