acrylic building emulsion

AT-01, 06 architectural latex thickener, BC-01, architectural coatings emulsion, BC-166 styrene-acrylic emulsion thickener Products This product is applicable to all kinds of latex paint, water-based adhesive system, thickening it with the styrene-acrylic latex, acrylic emulsion, vinyl acetate emulsion adhesives such as milk has good compatibility, thickening, high efficiency, rheological properties of good, and can meet a variety of construction methods and processing requirements. YL-BC-01 for preparation of interior and exterior paint. BC-166 is a cross-linked genes containing the acidic polymer thickener, suitable for a variety of styrene-acrylic emulsion thickening. Uses: In the construction industry, mainly used for interior and exterior latex paint, anti-rust paint, waterproof coating, acrylic adhesive, etc. series of architectural coatings industry. It gives a moderate leveling system and sagging performance, suitable for Roller Coating and thin plasma spray process, it is an ideal amount of flow of the state regulator. Was also used in the textile industry, paper industry, thickening of the emulsion adhesive. Packaging & Storage: 1. Product packaging for the 20kg plastic drum. 2. Product should avoid excessive temperatures below freezing or storage. The most suitable storage temperature of 5-20 ° C, and pay attention to mildew. 3. Since the packing date is valid for six months. Physical Characteristics Technical Specifications / Specifications AT-01 AT-06 BC-01 BC-166 Appearance milky white milky white milky white milky white Viscosity(mpa.s) 50 30 200-1000 50 Ph Value 2.0-4.0 3.0-4.0 7.0-9.0 2.1-3.5 Solid content(%) 29±1 21±1 45±1 27.5-28.5