ACO2 CO2 SENSOR/TRANSMITTER

IntroductionACO2 is a kind of easy install, low cost co2 sensor. Specially design for building automation and other places where needed co2 detecting. Measure density of co2 in the air, measurement range is 0-2,000ppm. With linerity output: 0-10V,0-20mA. ACO2 is for energy conservation and improve indoor air quality. Application:ACO2 is specially designed for ventilation control in building automation. In this application, indoor co2 level can be achieved interior of the fresh air requirement. Adjust the fresh air requirment accoding to the indoor people. Engergy conservation FEATURES• CO2 measurement: 0-2,000ppm CO2 • Output Signal: OUT 1: 0-10V OUT 2: 0-20mA • Low cost design, best choice for DDC control • non-specific application enviroment no need calibration Wiring1G+24V AC/DC (+)2G0GND3Volineary voltage output, 0-10V correspond 0-2000ppm4IoLineary currancy output, 4-20mA correspond 0-2000ppm Technical Data GenerallstandardEMC Directive EMC/89/336/EECWorking temperature0 – 5 degree CStorage temperature.-40 – 70degree CWoking humidity0 - 95%Working conditionPublic places, buildings, residence and industiral areaPreheat tiem≤ 3 minExpecting lifetime> 5 yearsmaintainceEvery 2 yearsHousing materialABS FRProtecting classIP20Power Supplypower24VAV/DC +/-10%,50HzPower consumptionLess than 1WCO2 measurementMeasurement methodSemiconduct gas detecting and natrual gas diffusion theoryMeasurement range0 - 2,000ppm CO2Repetation rate± 20ppm +/- detecting value* 1%accuracy± 30ppm + /-detecting value*2%Output signalVo lineary transform range0-10VDC corespond 0-2,000ppmIo lineaty transform range0-20mA corespond 0-2,000ppm D/Aresolving capability10 bits, 10mV / 0.016mA (2 ppm)Attention1. Not suitable for hig density SO2 condition2. The accuracy would meet the standard after using the products three weeks.3. The sesnor wl need 3 min to pre-heatDimension