Provision Wire for Redrawing Features: 1) 1.60 - 3.00mm patented wire with continued heat treatment 2) Charged electrogalvanized coating for 30 - 100gsm Packing: In big coil ab
Fine Stainless Steel Wire Features: 1) Diameter available: 0.035mm, 0.04mm 2) Quality: SS316L on small spool of 300g/spool (approximately), 0.04mm SS3043) Soft tensile strengt
Hog Rings We can supply varieties of hog rings with good quality
semi-flexible coaxial cable assemblies coaxial cable assemblies
8-wire/ 16-wire drawing machine Inlet diameter(tensile strength) : Max. 1.80mm (250N/mm2) for finish 0.40mm Outlet diameter : Φ0.15-Φ0.40mm Number of produced wires : 8 X co
Multi-wire drawing machine Production capacity: Wire material copper bare and tinned Number of produced wires 16 x copper bare i.e. copper tinned (2 levels, each with 8 wires)
8-wire/ 16-wire drawing machine Description of Multi-wire drawing machine: 1. Component of this line: - HT-MD100.8*22D wire drawing machine1 set - HT-MD140.8.2000A annealer 1 set -
HT- 450-13D Rod breakdown Machine for Copper wire Scope of Supply 1. Pay-off unit 1 set 2. Pointing and threading machine1 set 3. Main machine 1 set 4. Continuous annealer 1 set 5.Dancer (vertica
Rod Breakdown Machine for Copper Wires HT-450-13D high-speed Rod breakdown Machine for Copper is used to pull copper rod fromø8 mm to 1.3 mm-3.5 (4.0) mm. The drawing gears are line
HT-4500A Continuous annealing equipment Main technical data of the HT-4500A continuous annealing equipment: Machine modelHT-4500ADrawing line speed (MPM)1500MPM/MINAnnealing wire diameter(m
HT- 800 down coiler ModelHT-800Max. enclose speed1500 m/minWire diameter1.2- 3.5mmSpooler banister sizeinner580 x outside1050 x height1600 (mm)Spooler banister capacityM
HT-800C coiler Main technical data of the coiler: (1)Machine model:HT-800 (2) line speed (MPM):1800mpm/min(3)Coil diameter(mm):1.0-3.5(4)Coiler diameter:800(5)Coil
HT-10000Sn-15m/s Electrolytic single wire Plating Main technical data of HT-10000Sn-15m/s Plating machine: Type of line: HT- 10000 Sn- 15 m/s Length: approx. 7,500 mm Width: approx. 5,600 mm Heigh
Electrolytic Single Wire Plating Line (Ni) TECHNICAL DATA: Type of line :HT- 5400 Ni-15 m/s Length : approx. 19,000 mm (incl. stairs and accessories) Width : approx. 6,800 mm Height (cover co
HT-250-17D Intermediate Drawing Machine and Anneal Model HT-250-17DMax. inlet diameterφ3.5mmOutlet diameterφ0.4-φ1.6mmMax. Speed2000m/minMax. dies17Outside diameter of dies25mmArea reduct
Intermediate Wire Drawing Machine The feature of the machine: 1.Ahorizontal and tandem construction driven by double motors to achieve fast die change. 2.A helical gear with high acc
HT-250-17D Intermediate Wire Making Machine Features of the Machine: Fully submersible drawing lubricant Tungsten carbide drawing cone,Capstan High accuracy gear driven, Short oil protection
HT- 2000 Annealer Product Information 1) Machine Type: HT-2000 2) Woking range(mm):0.40-1.6mm 3) Max.mechanical speed(m/min): 2000 4) Max.Annealing current(A): 1200 5)
HT-280-13DT Large & Intermediate wire drawing Description of HT-280-13DT intermediate wire drawing machine:1.Component of large & intermediate wire drawing machine with annealer HT-280-13 Wir
Fine Wire Drawing Machine Main data:(1) Wire inlet range: Ø0.5--Ø0.6mm (2) Wire outlet range: Ø0.05--Ø0.18mm (3) Machinery speed: 2000MPM/Max (4) M
HT-14DT Fine Wire Drawing Machine Inlet diameter max1.6 Outlet diameter0.2mm 0.6mmMax. Wire Speed max1200m/minNumber of dies max14Die outside diameter 20 &.18percentage of elon
HT-22DTS Fine wire drawing machine and double spoo Part one Features of HT-22DTS Fine wire drawing machine and double spooler with continuous annealer: Drawing capstans arranged squarely can save spac
HT60 -15 Fine Copper Wire Drawing Machine Product Information 1)Machine Type: HT60-15 2)Intlet Diameter: 0.08 0.04mm 3)Outlet Diameter: 0.035 0.0185mm 4)Drawing Line Speed:1500m/min 5)Drawing
HT-15DA Fine wire drawing machine Technical data of HT-15DA fine wire drawing machine: Inlet wire diameter max 1.2 Outlet wire diameter 0.2 0.6 Machinery speed max 1200m/min Quanti
HT-24H Motorized pay-off rack Description of HT-24H motorized pay-off rack : This machine has 24 heads, which can load 24 bobbins wire per pay-off rack. This is the supply wire sy
HT-630P Double Twist Bunching Machine Part one: Compositions of HT-630P Double Twist Bunching Machine: 1. Double Twist Bunching Machine 1set 2. Electric control system (installed inside o
HT-650P Double Twist Bunching Machine Technical Tata for Double Twist Bunching Machine Machine typeHT-300PHT-400PHT- 500PHT-650PMain usageMulti-copper wires intertwistStranding sectional
Stranding Machine Technical Data for Double Twist Bunching Machine Machine typeHT- 300PHT- 400PHT- 500PHT-650PMain usageMulti-copper wires intertwistStranding sectiona
warp-rebeaming machine 1. Speed : 600-900m/min; 2. Bobbin : PN630mm 3. Tension control : automatical; the tension should be stable and uniform; 4. It can draw all change gr
HT-630F/800FMotorized Pay-off machine Part one Motorized pay-off features: It can be put several wires, adopting cylinder to be up and down the spooler, it saves labor. To use proximity s
Cable Machinery-cage type Lay Up machine Cable Machinery-cage type Lay Up machine Laying Up Machine can be used to manufacture large size plastic cable or PEX cable, section of cable can be
Cable Machinery-Rigid Type Stranding Machine Cable Machinery-Rigid Type Stranding Machine (Driven by transmission shaft) 1.Instruction: This machine is used for sector stranding and compacting
Drum Twister Type Lay-Up Machine Drum Twister Main Components: Rotating pay off(Quantity and specification are decided by customer), guide stand, filling clewpay off stand, Rotarydie
Cable Machinery - Tubular Type stranding Machine Cable Machinery - Tubular Type stranding Machine 1.Instruction The tubular stranding machine is used for stranding steel wire, al wire, cu wire, cont
Cable Machinery - Planetary/Cage type stranding ma Planetary Type Stranding Machine for OPGW cable 1. Introduction: This machine is used to stand ACS cable, stainless steel fiber unit, steel-cored AL
Twisting Line for wire Twisting Line for wire High-precision Double Twister with back-twist Main parts: Φ500 active dual-bobbin type pay-off with back-twist; Twisting m
Copper Rod Breakdown Machine With Continuous Annea Copper Rod Breakdown Machine With Continuous Annealing 1 Introduction This line is used to drawing the Aluminum Rod of Φ9.0mm or Φ8.0mm Coppe
SZ stranding line SZ stranding line Technical dataItemrequestCable-making dia. Max28mmLoose tube dia./number of tube 2-4.5 mm/12Cable-making speed (pitch>25mm)50m/m
Premise Optical Cable Production Line ItemRequestDia. of tight-coated optical fiber0.9mmDia. of premise optical cable6.0mmLine speed100m/min (φ3.0)Dia. of tight-coated optical fiber r
Enamelled Copper Wire, magnet wire, winding wire enamelled copper wire, winding wire, magnet wire with various kinds, like: PEW/130, PEW/155, UEW/130/155/180, EIW/180, EI/AIW/200. Annual output: 50,
super enameled copper wire,magnet wire,enamelled c super enameled copper wire,magnet wire,enamelled copper wire with various kinds, like: PEW/130, PEW/155, UEW/130/155/180, EIW/180, EI/AIW/200. Annual
EIW/180 Polyester-imide EIW/180 copper wire, winding wire, magent wire, high thermal properties and good chemical resistance, used in motors, transformers
Class 180 polyester-imide enamelled copper wire, m Class 180 polyester-imide enamelled copper wire, magnet wire, insulation wire, High thermal properties and good chemical resistance. Used in motors,
class 130 self solderable polyurethane enameled co class B self-solderable polyurethane enamelled copper wire, from size 0.05-1.40. IEC 60317-4.MW 75-C, UEW wire for short. It has good mechanism and e
Class 180 nylon/polyurethane copper wire, enameled Class 180 nylon/polyurethane copper wire, enameled wire, The nylon overcoated wires demonstrate the same properties as the above wires without polyam
Copper wire, Enamelled Copper Wire, Electrical wir Copper wire, Enamelled Copper Wire, Electrical wire with various kinds, like: PEW/130, PEW/155, UEW/130/155/180, EIW/180, EI/AIW/200. Annual output:
Class 155 self-solderable polyurethane enamelled r Very good solderability and higher thermal properties than UEW 130. Used in transformers, linear motors, relays, solenoids, small motors, clock coils
PEI/AI 200 copper wires, magnet wire, enamelled co PEI/AI 200 copper wires, magnet wire, enamelled copper wire. Excellent heat shock resistance, excellent refrigerants, suit for high speed winding. Be
Class 130 polyester enameled round copper wire Good mechanic and chemical properties. Used in Motors for Fans, washing machines
Class 155 modified polyester enameled round copper Improved mechanic, chemical and thermal performance in comparison to Polyester enameled copper wires. Used in various kinds of motor
