Place of Origin |
Guangdong China (Mainland) |
Brand Name |
Eastar |
Model Number |
ESD-ZRG-T8-0600-GSP9-A1 |
LED Tube is designed to work with conventional fluorescent fixtures. To replace the short lived fluorescent lamps that are typically used in interior lighting, LED Tubes lighting can be used to retrofit existing fluorescent installations in all types of applications.LED tube Total power consumption11WLED consumption9WInput voltageAC90-250V, 50/60HzPower supplybuilt-in constant currentLighting sourcelow powers 3528/3014/5050 LEDsLED quantity288pcsDimension26mm*600mmMaterialPC cover transparentLamp holderG13Luminous flux810lm ±10%Luminous efficiency70–80lm/WColor temperature3000-3500K, 6500-9000KViewing angle≤120 degreeCRIRa>70Working temperature-20 40°C(-4 104 °F)Environment humidity<95%Working environmentindoor useProtection ratingIP44Life-span30,000 hoursWeight230gCertificationCE, RoHS and UL pendingWarranty2 years Features Features1 Ultra thin design, 15mm in thickness2 Superior raw materials. Stylisheverlastingcolor aluminum frame with advanced anodized and oxidation treatment. Modern & elegant appearance makes the ceiling more graceful3 Different sizes available: 300*300mm, 300*600mm, 600*600mm, 600*1200mm4 Diversity in shape (square, rectangle)5 Dimmable optional6 High quality light source. The attenuation of SMD LED light source is less than 3% by 3,000hrs aging test under temperature 50 degree celsius, high luminous efficiency of single LED.7 Advanced high efficiency constant current driver with short circuit protection, open circuit protection and overload protection, etc.8 Leading heat sink design, four light emission instead of backlight emission.9 Special circuit design, each group of LEDs can work separately, avoiding any problem of lighting output caused by single faulty LED10 Wide range voltage input11 No UV or infra-red radiation, no mercury or lead, eco-friendly, no danger of broken glass12Strictqualitycontrol, lightingagingfor72hrsandcompleteinspectionbeforeshipping13Solid-state, high shock resistant, strong packaging, convenient to transportation14 Easy to install, low maintenance cost. Cut cost by reducing re-lamp frequency, especially in difficult to reach area that require lift.15 Low energy consumption, saves 60% power comparing conventional light16 Even illumination, quiet, soft, comfortable and bright light, ease eye strain effectively.17 Long life-span: 30,000-50,000 hrs18 No need for starter and ballast, instant soft-start, no speckle, no flickering, no humming, no buzzing, no RF interferencePackaging Electric Connection DiagramInstallation A. Inductive Ballast B. Electronic BallastAttentions 1 Before installation, check whether the power is suitable. The tube must work under the right voltage according to the specification. 2 Cut off the power first for safety 3 Don’t take the tube apart 4 Recommend indoor use 5 Please use it in a ventilation environment and keep it from water. 6 DO NOT connect power (positive & negative) to the two pins at one end only. If they are connected together (positive/negative), you will create a short circuit! Packaging Cases