433Mhz, 5W RF module, wireless data modem

433Mhz, 5W RF module, wireless data modem, data transceiver: 1. Products Main Features * Interface: RS-232/ RS-485/ TTL/USB optional; * Multi-channels: 8 channels, expandable for 16/32 channels; * Baud rate in air: 1200/2400/4800/9600/19200bps, set before delivery; * Transparent data transmission: What has been received is exactly what has been transmitted, suitable for any standard or non-standard user protocols; *SMT techniques, Aluminum alloy crust with good thermal and Shielding Performance * Integrated power amplifier and TCXO components, Watchdog strengthen reliability * Interface format: 8N1/8E1/801 user-defined, or customization for other format interface; * Modulation: GFSK. Based on the Gaussian Frequency Shift Keying (GFSK) modulation, High anti-interference and Low BER (Bit error Rate); * Half duplex: Integration of receiver and transmitter£¬auto change for receiving and sending; * Low power consumption and sleep function; * Widen Temperature: -35 +75C (-31 167 F); * Working humidity: 10% 90% relative humidity without condensation; * Impedance£º50ohm (SMA antenna port, multiple antenna options available); * Complying with EN 300220 and ARIB STD-T67. 2. Application areas * Automatic meter reading(AMR); * Environment monitor system; * Wireless electronic display screen; * Wireless smart terminal: POS, PDA, PTZ; * RS-485 wire multi-drop system changeover wireless system; * Industrial Automation, PLC Control, Wireless Data Acquisition, SCADA; 3. Specifications * RF power: 5W /37dBm; * Receiving current: <30mA; * Transmitting current: <1.5A; * Sleep current: <1mA£» * Power supply: DC 12V; * Size: 85x58x16mm (without antenna port). * Range: <8Km (BER=10-3@9600bps, when antenna is 2m above ground in open area), <12Km (BER=10-3@1200bps, when antenna is 2m above ground in open area); 4. Interface definition Pin No.Pin nameDescriptionLevelConnection with terminalRemands1GNDGrounding of power supplyGround2A(TXD)A of RS-485 or TXD of RS-232A(RxD)3B(RXD)B of RS-485 or RXD of RS-232B(TxD)4NC5DGNDDigital grounding6RXD/TTLSerial data receiving endTTLTxD7TXD/TTLSerial data transmitting endTTLRxD8SleepSleep control (input)TTL Sleep signalLow level sleep9TestEx-factory testingNOTE: Generally the module is in receiving status, if the Sleep pin (No.8) continuously connects low level (>200millisecond), the module will be in sleep status, modules can not receive or transmit any data when sleep. Only when the Sleep pin set in the state of high level (VH<3.5V) or hangs/empty, module can be in receiving status again. The delay time for conversion between sleeping and receiving is less than 150mS. 5. Setting of channel, interface, and data format User can change or view the module's parameter setting (interface baud rate and channel) by testing software YSPRG.EXE in the CD (Free).6. Accessories Standard package: One module+A4# small magnetic car SMA antenna