300mW 532nm DPSS Green Laser, T3 Series

GL532T3-300Optical ParameterOutput Wavelength532±1nmOutput Power300mWSpatial ModeTEM00Operating ModeCWMode Quality (M2)<1.2Beam Divergence, Full Angle1.5 ± 0.2mrad [1]Beam Diameter (1/e2) @ Exit2.0 ± 0.2mmPower Stability5% (rms, over 2 hours, T= 25°C) [2]10% (rms, over operating temperature)Beam Pointing Stability<50μrad over 2 hours (ambient ±5°C )Polarization, Linear>100:1Amplitude Noise (20Hz to 20MHz) 30% rmsResidual IR<0.1%Electrical ParameterPower SupplyADR-700AADR-700DDDR-7005Adjustable PSU with LED DisplayDesktop PSU5VDC DriverInput Voltage85 240VAC, 50/60Hz5VDCModulation10KHz TTL Modulation & 10KHz Analog Modulation [3]10KHz TTL modulation or 10KHz Analog Modulation (optional) [4]Mechanical ParameterDimensions of Laser Head140. 8 × 73 × 46. 2mmWeight of Laser Head0.6KgDimensions of Power Supply154 × 155 × 95mm133 × 130 × 65mm100 × 60 × 56mmWeight of Power Supply1.5Kg1.2Kg0.2KgReliabilityWarm Up Time<10 minutesCoolingForced-air cooled[5]Operating Temperature, Case10°C 35°CStorage Temperature-20°C 60°CExpected Operation Lifetime10000 hoursWarranty12 months [6]Note[1]0.5mrad or 1.0mrad beam divergence is available upon request. [2]Better power stability (<1% rms or <3% rms, over 2hours, 25°C) is available upon request. [3]TTL+ (0=laser off, 1=laser on), TTL-(0=laser on, 1=laser off) and Analog modulation can be switched by a toggle switch on the back panel of the power supply. [4]30KHz TTL modulation or 30KHz Analog modulation is available upon request. [5] The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. [6] 2-Year Warranty is available upon request.