Place of Origin |
Beijing China (Mainland) |
Brand Name |
IDM |
Model Number |
IDM-300ME |
Brief Introduction IDM-300ME voice access equipment provides two shared wire-speed Ethernet interface 100M, at the same time can provide 6 Group series of E1, of which 4 groups of E1 interface which are of 75 European-African, 2 groups of 120 European standard E1 interface, with polarity reversal and caller ID-enabled phones. FXO, FXS, may be filled with 300 lines of users, the device provides service for a total bandwidth of 155M. Transmission can be achieved easily in a cost saving result . IDM-300ME also provides management of disk-controlled CMU, power supply, backup bell flow features, a great service to ensure the reliability of transmission. Features 1. Single optical path direction of 300 telephone user interface capacity. 2. Provides wire-speed Ethernet channel 100M can work in full-duplex/half-duplex. 3. Mutually redundant CMU Medium Control panel, while providing transmission 6 groups through E1 channel group. 4. Owns perfect simple network management functions. 5. With multiple clock mode, can meet a variety of application environments clock requires. Specifications Power Supply: 220VAC/-48VDC Consumption: 40W±10% Optical interface Rate: 155Mbps±50ppm Wavelength: 1310nm Sensitivity: Better than -36dBm Connector: FC/SC E1 interface Comply with: ITU-T G.703 standard Rate: 2048kbps ±50ppm Code: HDB3 Impedance: 75Ω for unbalanced/120Ω for balanced Frame structure: PCM30/31 Signaling: In-band 100M Ethernet interface Rate: 100Mbps, Comply with: IEEE 802.3u Interface mode: 10/100M auto-negotiation Physical connector: RJ45 FXO and FXS interface Impedance: 200Ω+560Ω//0.1μF Audio frequency range: 300Hz 3400Hz Compression ratio: class A in ITU G.711 Loop current: 25mA Operating environment Temperature: 0ºC 40ºC Humidity: 90% (non-congelation state) Dimensions 482mm×280mm×266mm (width × depth × height)