3 Lanes full height turnstile

Description:3 Lanes full height turnstile is an integration of mechanism, electric, mic-controller and various kinds of reading and writing technologies. It is used to control and manage passages smart by working with different kinds of readers and writers, reliable protection equipment, real-time alarm and direction guide.3 Lanes full height turnstile has standard electrical interface which can be connected with barcode cards, IC cards, ID cards, magnetic cards conveniently. Also our products can satisfy the requirements of fire-control.Features:1. Problem-self-checking function2. Many options of working ways: bi-direction card reading; one direction card reading and another no reading; one direction card reading and another freely3. When power off, arm open automatically and power on again, arm will be held automatically.4. When valid card read, just push the arm with little force and arm will turn. After passenger passing, arm will be held automatically. Three arms are always closed with each turning 120 degrees.5. Unique wheeling system is adopted to ensure accurate zero holding and unholding.6. Standard interface is convenient for connection with different readers and writers.7. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.8. Stable running with little noise.Specifications:1. Height: 2300mm2. Passage width: 700mm3. Arm length: 600mm, 3 arms stand by dividing in 120°/4 arms stand by dividing in 90°4. Self test and alarm when function failures ( users need to read the guidance of circuit board LED status instruction )5. Re-positioning, the turnstiles will deny the access privilege and be locked if the user doesn’t pass by within the legal period6. Could be controlled by access controller7. LED indicator ( Green arrow for being granted, Red cross for being denied )8. RS485 port9. Re-positioning( auto lock ) delay, default setup is 10 seconds10. Cabinet material: 304 stainless steel at 1.5mm11. Arm material: 304 stainless steel at 2.8mm12. Obstacle post: 304 stainless steel at 1.5mm13. Arm maximum holding force, 80Kg14. Revolving directions: one way or two ways15. Power consumption, AC220±10% V/ 50 ±10% HZ16. Fail safe or fail secure( default setup is fail safe, which means the arm will be unlocked when power off )