Place of Origin |
Zhejiang China (Mainland) |
Brand Name |
HANRI |
Model Number |
S-25-24 |
Input Voltage |
220V |
Output Voltage |
24V |
Output Current |
1.1A |
Weight |
0.37Kgs |
Output Power |
1 - 50W |
Output Type |
Single |
S-25 Series switch mode power supplyCompetitivedprice and high reliability 105oC Output capacitorAC input power suitable for the world High efficiency and low operation temperature.Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelS-25-5S-25-12S-25-15S-25-24DC output voltage5V12V24V24VOutput voltage range(Note:2)±2%±1%±1%±1%Rated output current5A2.1A1.7A1.1VOutput current range0-5A0-2.1A0-1.7A0-1.1VWave and noise(Note:3)50mVp-p100mVp-p100mVp-p100mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±1%±0.5%±0.5%±0.5%DC output power25W25.2W25.5W26.4WEfficiency65%76%77%80%Adjustable range for DC voltage+10,-5%±10%±10%±10%Input current0.6A/115V 0325A/230VAC inrush currentCold-start current 15A/115V 30A/230VLeakage current<0.75mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryOver-voltage protection115% 135%Temperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time800ms, 50ms, 10ms/115V 300ms, 50ms, 80ms/230VACVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHOverall dimension99×97×35mmWeight0.37KgsSafety standardsUL 1012 TUV EN6050(IEC, UL 1950) ApprovedEMC standardsCISPR22(EN55022), IEC801-2,3,4,IEC555-2 VerificationNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%.