16-Slot Managed Media Converter Chassis with Redun

Media Converter Chassis The OnAccess2000 offers up to 15 media converter slots to accommodate all kind of different media converter type, such as 10/100Base-TX to 100Base-FX or 10/100/1000Base-TX to 1000Base-X media converter. OnAccess2000 network management solution allows administrators to easily configure features,monitor performance, and troubleshoot the system using a standard Web browser and Simple Network Management Protocol (SNMP)-based network management platforms. Features Up to 15 media converter slots in one chassis. In-band network management communication with TS-1000 standard. Up to 4Chassis stackable in management by RS232 cable link. 10/100Base-TX to 100Base-FX media conversion. 10/100/1000Base-TX to 1000Base-X media conversion Single fiber to dual fibers conversion Multi-mode fiber to single mode fiber conversion Non-blocking store-and-forward architecture enables the forwarding rate to proceed at a full wire speed . 802.1p Class of Service with 2-level priority . 802.3x flow control for a full-duplex mode and collision-based backpressure for a half-duplex mode . 802.1Q tag-based VLAN with 12 bit VID. Egress/Ingress rate management control with 2-level priority. Remote loop back capability. Remote power off sensitive. Converter card exchangeable between chassis and remote unit. Network Management In Band: SNMP, Web-based HTTP and Telnet. Out of Band: RS-232 Console. Network Protocol and Standards IEEE: 802.3, 802.3u, 802.3z, 802.3ab, 802.3ah, 802.1p, 802.1q, 802.1v, 802.3ad, 802.3x IEFT: RFC1157 SNMP, RFC854 Telnet, RFC 1123/1493/1643 MIB Port Configuration 10/100Base-TX RJ45 port and 100Base-FX SC port with single or dual fiber options. 10/100/1000Base-TX RJ45 port and 1000Base-X SC or LC port with single or dual fiber options. 100Base-FX and 1000Base-X port with single and multi-mode fiber options. Optical Interface Options 100Base-FX ² Single single-mode fiber, dual wavelength 1310 / 1550nm, SC connector, operating distance 15 / 25 / 40 / 60km ² Dual single-mode fibers, single wavelength 1310 or 1550nm, SC connector, operating distance 15 / 25 / 40 / 60km ² Dual multi-mode fibers, single wavelength 1310nm, SC connector, operating distance 2km 1000Base-X ² Dual multimode fiber (50/125 μ m), single wavelength 850nm, dual SC or LC connectors, operating distance 550m ² Dual multimode fiber (62.5/125 μ m), single wavelength 850nm, dual SC or LC connectors, operating distance 275m ² Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC or LC connectors, operating distance 15/40km ² Single single-mode fiber, dual wavelength 1310 / 1550nm, SC or LC connector, operating distance 15 / 25 / 40