10mm clear toughened glass

The tempered glass is a kind of high-strength safety glass made from ordinary flat glass. In the production process, glass sheet is heated to reach its softening point, and then quenched swiftly with the cold wind. If the thickness is same, the tempered glass has a bending strength 3-4 times of that of the ordinary glass and 5 times higher in anti-impact strength. Our products accord with China Standard GB15763.2 (Part Two, Safety Glass for Architecture Application: Tempered Glass) and GB1741 (Tempered and Heat-Strengthened Glass for Curtain Wall Application). The upmost advantage of tempered glass rests with its safety. When broken, it will fractures into many small obtuse particles appearing like a honeycomb pattern to minimize the hurt to the people. In addition, the tempered glass has a good thermal stability for it can endure the temperature 3 times of that of the ordinary glass, and also withstand 300°C of difference in temperature change. Therefore, the tempered glass is widely used in the high rise buildings, automobiles, escalators and indoor separations and decorations, etc. Product Size: Flat tempered glass Max. Size: 2440mm X 9000mm Min. Size: 300mm X 300mm Thickness range: 4mm - 25mm Bent tempered glass Max. Size: 2440mm X 4000mm Min. Size: 600mm X 400mm Thickness range: 4mm - 19mm Min. bend radius: 1000mm (for 5-6mm thickness), 2000mm (for 8-12mm thickness), 3000mm (for 15-19mm thickness) Max. arch height: 660mmQuality Guarantee Quality management system: obtained ISO9001:2000 certificate (by Shanghai NQA Certification Co., Ltd) and China Compulsory Certification (3C) certificate(by China Safety Glass Authentication Center). Guarantee of software and hardware: We introduced Germany A + W production management software, adding a full range of testing equipment so we can ensure the availability of first-rate products. Quality Commitment: to provide customer with test reports, certificates, quality report, to ensure that our products accord with China Standard and meet the demands of the customer. Technical consultation: provide the relevant free technical advice of glass processing and the best optimized combination design for customers. Whole process service: We established sale service hotline, receive consultation from client and visitors ,settle all kinds of problems on sales and processing, provide distribution service in the city and build sales files for customer, provide after-sale assistance . On-line offer: provide customer with online inquiry system to facilitate customer orders. Tempered glass production line: TCF-GTH-96340 super sized high-tech flat tempered glass production line,manufactureed by Taiwan “Tungchang” company, can process glasses the thickness of which is 5-25mm. Now the glass used in building is at a turning point in the construction phase, that the large size glass may be desirable to ensure ideal light. With the explosion-proof system for super thickness glass and unique temperature balance technology,the capacity of “Tungchang” production line is as follows: max. size is 2440mm×8800mm,and min. size is 300mm×300mm. The 2 LD-A2439C39 flat and bent tempered glass production lines are patent products which are produced by Luoyang Land Co.,Ltd.With the feature of reversible production ,both flat and bent glass can be processed on the line.The processing specification is as follows:thickness: 4-19mm; Max. size: 2440mm×4200mm;Min size: 300mm×300mm Tamglass ProE CCSTM dual-stage forced convection tempering furnace In ordet to avoid the adverse consequences such as coating layer burnt down,glass bending,deformation and optical distortion resulted in the process of Low-E coated glass’s tempering, Finland Tamglass company developed ProE CCSTM dual-stage forced convection tempering furnace so as to optimize the heating efficiency at each stage and was applied for a patent.At the first stage the glass will be heated to a certain temperature by strong convection cycling hot air.Research shows that strong convection heating will be most effective when the glass is at low temperature. With the rising of the temperature of the glass ,the glass will be heated mainly by heat radiation. Strong low-temperature hot-air convection heating cycle can heat glass rapidly, particularly effective for LOW-E glass. Lower temperature reduces the possibility of broke down of glass as a result of heating shock, At the same time,it reduces the deformation and improved the flatness greatly,no more than 0.1% for 6mm glass. At the second stage, the glass is heated mainly by thermal radiation with Tamglass patent convection systems, through the vertical rows of compressed air pipe, the heat transfer to the glass surface, furthermore, Tamglass developed the automatic temperature control system. According to the type of glass, the computer adjust the temperature automatically in accordance with the default values and parameters to ensure rapid and accurate heating. In addition, ProE CCSTM dual-stage forced convection heating tempering furnace equipped with quality monitoring system (OPS) and other advanced system that guarantee the quality of tempered glass effectively.