100W Triple output switching power supply(T-100D)

100W triple output switch powersupplyCompetitivedprice and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelT-100C T-100DCH1CH2CH2CH1CH2CH2DC output voltage5V15V-15V5V12V24VOutput voltage range(Note:2)±2%±6%±6%±2%±6%±6%Rated output current10A2.5A1A6V2V2VOutput current range2-12A0.2-2.50.1-1A2-12A0.1-2A0.2-2AWave and noise(Note:3)800mVp-p150mVp-p150mVp-p80mVp-p150mVp-p150mVp-pInlet stability(Note:4)±0.5%±1%±1%±0.5%±1%±1%Load stability(Note:5)±1%±5%±5%±0.5%±1%±1%DC output power100W102WEfficiency77%79%Adjustable range for DC voltageCH1; +10,-5%CH1; +10, -5%AC input voltage range85 264VAC selected by switch 47 63Hz;120 370VDCInput current2.5A/115V 1.25A/230VAC inrush currentCold-start current 30A/115V 60A/230VLeakage current<0.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: tuto recoveryTemperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time200ms, 50ms,160msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvACIsolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHOverall dimension199×110×50mmWeight0.83KgsSafety standardsMeet UL 1012 requiement (Not apply for the mark)EMC standardsMeet FCC PART 15 J Conduction class BNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%.