10-60G/Hr Ozone generator

1. Electrodes: Use enamel coating as internal electrode, stainless steel as external electrode, capacity of corona resistance and machinery anti-force capacity are stronger than glass, ceramic material. Uniformity air gap between enamel coating internal electrode and stainless stee l external electrode, it produces high concentration ozone output. It uses insulation materials for connections, for preventing creepage. 2. Cooling way Water cooled for internal & external electrodes, effective prevent high temperature rising when the tube is discharging, for ensuring high ozone concentration output. 3. Adjustable ozone output range: 20-100%. Use high-frequency & Intelligent power supply inverse system, ozone output can be changed on demand to achieve accuracy control. 4. High ozone concentration & output Technical SpecificationItem Unit Model CH-PC 10G CH-PC 20G CH-PC30G CH-PC50G CH-PC60G Flow rate of oxygen L/Min 1-3 3-10 3-6 3-20 8-18 Ozone concentration Mg/L 86-66 104-51 100-88 108.1-43.9 90-58 Ozone output G/Hr 5.28 11.88 18 31 18 32 19.46 53 43 623 Power W 0.30 0.30 0.50 1.00 Dew point °C -45 High voltage output V PP3600 Cooling way Water cooled for internal & external electrodes Output cooling water temperature 30°C Fitting diameter mm 1.air inlet & outlet for external diameter 8mm 2.cooling water gap for external diameter 12mm 3.cooling water gap for internal diameter (pneumatic interface) 12mm Power supply V/HZ 110/220V 50/60Hz Adjustable range % 20 100% Fuse of power supply A 5 Size of enamel tube Mm 320×125×130 420×120×130 680×76×120 69×11.5×13 Size of power supply Mm 165×150×110 200×185×130 250×220×140 Net weight Kg 3.00 4.50 6.70 9.25 10.85 Working conditions: Ambient temperature: 20°C, Oxygen concentration: >99%, Dew point: >-45, cooling water output temperature: 20°C. Ozone output will be changed about 10-20% if the working conditions changed.