+4 wheel alignment (3D wheel alignment with CE)

4 wheel alignment(3D wheel alignment with CE) Basic Functions: Parameters measurement such as camber, Caster, Kingpin inclination, Toe-in & Toe-out Features:1. 3D cameras alignment based on the car and not influenced by the platform.2. Measurement system equipped with double digital cameras and four target disk, supplying revolutionary measurement mode.3. There is no electronic component, so the wheel alignment will not have a component failure problem.4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration5. Measurement progress no need to compensate for steel ring, the precise eccentric compensation will be just once pulling or pushing the car back and forth6. Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners7. Easily maintenance, download and upgrade freely for the model dataModel: SX-G6TMeasurement project AccuracyMeasurement rangeDisplay accuracy1´/1mmCamber±2´±10°Caster±6´±20°Kingpin Inclination±6´±20°Toe-in & Toe-out±2´±20°Set back±2´±5°Thrust angle±2´±5°Wheel Deviation±2mmAxis Deviation±2mm BasicFunction: Parametersmeasurementsuchascamber,Caster,Kingpininclination,Toe-in&Toe-out Axisdeviationmeasurement Wheeldeviationmeasurement Single-roundmeasurements Thevehicleliftmeasurementfunction Steeringwheeladjustment Checkthehorizontaloftheliftingplatform.