Zylindrische Sicherungshalter

These fuse holders are supporters for fuses with size up to 22×58mm.They are capable of working under heat caused by rated current and expected short impacting current up to 100KA.It can also function as a tuse disconnecting switch by muliti-phase combination.There are two in/out lines at the RT18N fuse base,providing a power cut function.The RT18L type has a safety lock to lock the fuse carrier when disconnected to avoid wrong operation;it can also be equipped with an indicator,which goes on when the fuse linke breaks. Rated insulate voltage up to 690V;Working frequency 50Hz AC; Conventional free air thermal current up to 125A;Compliant with GB13539.1GB13539.2GB13539.6GB14048.3 and IEC60269-1IEC60269-2IEC60269-2-1IEC947-3. After the plastic-injected case is equipped with contacts and fuse links,the bases are formed by welding or riveting both capable of being multi-phase structured. RT1FB16-3JRT19-48JRT19 are open-structure,and others are semi-concealed structure.There are five fuse sizes available to choose from for the same fuse base of RT18NRT18Band RT18C. There are two sets of in-out lines for RT18N. One is installed with fuse links of the according size.The other is a permanent open contacts with double breaking points.The whole base unit can cut the power.RT18 bases are all DIN rail installed,among which the RT18L is equipped with safety lock against wrong operation in the breaking state.