Zurück Spülen Schnelle Open / Close Eckventil

As a specially designed valve applied in coal-prossed chemical facilities, the Back Purging Fast Open/Close Angle Valve installed on the top of S-1501. This equipment has high requirements on its open/close speed (within 0.25S for a circle), leakage class (ANSI VI, Buble Class), high operation pressure (medium as high pressure Nigitron, 5.6MPa—5.8 MPa) and high action frequency (1 circle per 15 mins). Our self-developed Back Purging Fast Open/Close Angle Valve has applied for national-patent. A special quenched hard alloy is used on plug and seat to guarantee the hardness of valve parts to meed the requirement of anti-erosion, anti-impact, high pressure difference resistant and high sealing ability. Based on its superior performance, our Back Purging Fast Open/Close Angle Valve is your perfect solution to replace imported expensive products. Technical Parameter 1.Item: Back Purging Fast Open/Close Angle Valve 2.Mode NO.: ZDXGY-900LBDK80D1CF 3.Applicable Medium: High pressure Nitrogen 4.Nominal Pressure: 7.8MPa 5.Working Temperature: 250°C 6.Specification: DN80-DN100 7.Nominal Pressure: ANSI900LB 8.Air Supply Source Pressure: 0.4 -0.7 MPa 9.Control Signal: 24VDC/220VAC 10.Back Signal: Active Contact Signal ON/OFF 11.Design Standard: BS5793-1981 12.Testing Standard: API 598-1996 Characteristics: 1. Fast open/close speed (within 0.25S), small open/close torsion. 2. High Seal Class: Class ANSI VI. 3. Specially designed valve structure enables a long life span. Exploded View