YMC Series Meereskorrosions Abdichtungen Ele

This series are low frequency electric connector, adopting bayonet quick connection. It has 9 kinds of shell No. 35 kinds of hole arrangement, from hole 1 to hole 62. 5-key-location has functions of blind insertion and anti-mispluging. High reliable hyperboloid wire spring hole makes connector soft insertion and extraction, small contact resistance. The termination type of plug is compressing type while socket is welding type. It has the water resistance of 50 meters. It widely applies to electrical connection between equipments and cables and between cables and cables under severe environments such as moisture and soaking and so on. Main technical performance 1. Mechanical performance —shell: stainless passivation (Copper alloy satin nickel plating can be adopted according to user’s demands.) —insulator: thermosetting material —sealing line body and sealing ring: silicone rubber —contact element: copper alloy, gold plating —vibration: frequency 10 2000Hz, acceleration 196m/s2 —impact: acceleration 980m/s2 —constant acceleration: 980m/s2 —mechanical life: 1000 times 2. Electrical performance Contact resistance and rated current: Specification of contact element(mm)Contact resistance(mΩ)Rated current(A)Inside diameter of welding wire barrel(mm)Φ155Φ1.3Φ1.52.510Φ1.8Φ21.2520Φ2.5Φ30.7540Φ3.4Rated voltage, withstanding voltage and insulating resistance Working environmentRated voltage(V)Withstanding voltage(V)Insulating resistance(mΩ)Normal condition5001500≥5000Hygrothermal condition5001125≥100Low pressure(1kPa)250300-Anti-EMI shielding: 100MHz 1GHz, min is 60dB 3. Environmental performance —operating temperature: -55°C +200°C —relative humidity: 95% at +60°C —sealing performance: soaking depth 0 50m —environment resistance: 1000 hours salt spray test It also has good performances of fungus proofing and sand dust proofing. Mark of product YMC 22 F 7 K1 P40 (W) YMC: main title of series: YMC-YMC series marine anti-corrosion waterproofing electric connector 22: shell No.: 18-22-24-27-30-33-36-39-42 F: type of shell: T-plug, F-square plate socket, S-nut tight type through-wall sealing adapter, outside the panel is hole while inside is pin 7: number of contact element: refer to pareto digram K1: type of contact element: Z1-pin with gold plating, K1-jack socket with gold plating, M1-through-wall sealing contact element (only applied to through-wall sealing adapter)P40:shell plating and structure: D40-short shell, tail without thread, stainless passivation (only applied to square plate socket and through-wall sealing adapter) P40-tail with thread, optional accessory, stainless passivation(W): key: key N-no mark, key W-(W), key X-(X), key Y-(Y), key Z-(Z) Note:The representation of connector adopts fraction form. Socket is the numerator while plug is the denominator (can only mark plug’s shell plating and structural form), they are separated by slash. The models of the plug and the socket are marked on the product directly; the model of the electric connector is used for user to order and for factory to manufacture and manage.The optional accessory can be ordered alone. Example Socket: YMC series, No. 22 shell, jacket socket with 7-core, tail with thread, optional accessory, stainless passivation, key W, the model is: YMC22F7K1D40(W).Plug: YMC series, No. 22 shell, pin with 7-core, tail with thread, optional accessory, stainless passivation, key W, the model is: YMC22T7Z1P40(W).The model of whole set of electric connector is: YMC22F7K1D40(W)/P40(W)(Because of the limited space, we don't list all the information here. Please contact us directly or leave messages if more details are needed.)