YJ Korrosions Furan Resin

The product was developed by Architecture Institute of Metallurgy Ministry who refer to the similar product of West Germany and passed the technology appraisal of Metallurgy Ministry. It is furfuralcohol-furfural furan resin with low viscosity,high adherence strength, good heat resistant and good anticorrosive in all organic solvents.It is an ideal adhesive because of its acid resistant and alkali resistant to be used on some occasions where can't use epoxy resin,phenolic resin and unsaturated polyester resin.(to produce glass fibre reinforced plastic when mixed with the powder of glass fibre reinforced plastic, to produce clay when mixed with clay powder,to produce mortar when mixed with mortar powder). The product shows good resistant to most of acid and alkali and can be used under the temperature of about 140. YJ furan resin belongs to furfuralcohol-furfural resin with low viscosity,excellent resistant to acid,alkali and solution,high adherence strength and good heat resistant. 1. Technical Index Appearance: fulvous viscous liquidWater Content 0.5%Viscosity: 20-30s(spread-4)Density1.18/cm32. Usage YJ furan resin is used in the anti-penetration layer of furan resin-glass fibre reinforced plastic,furan resin-clay lined with cast slate and granite stone,the tank, pool and ground of furan resin-concrete,also used as lining in various equipment to resist corrosive. 3. Proportioning: ItemFuran-clayFuran-mortarFuran-glass fibre reinforced plasticYJ furan resin 1 1 1 clay powder 3.5-4 mortar powder 2.5-2.7 powder of glass fibre reinforced plastic 0.3-0.5 4. Main Physical Property ItemFuran-clayFuran-mortarFuran-glass fibre reinforced plasticCapacity 2 2.2 1.7 Compression strength,MPa 85 60 Tensile strength, MPa 8.5 8 85 Adherence strength with tiling,MPa 3 2.8 Use time(20), minutes 45 45 45 Hardening time(20),hour 12 12 12 The highest use temperature, 140 140 140 5. Main Anticorrosive Property MediumAnticorrosive level MediumAnticorrosive level5-60%sulfuric acid good 5-10% sodium hydroxide good 31% hydrochloric acid passable toluene good 5-20% hydrochloric acid good water good 10% nitric acid passable 3% sodium chloride good 5% nitric acid good alternating between 40% sulfuric acid and 10% sodium hydroxide good 10% chromic acid passable alternating between 20% sulfuric acid and 10% sodium hydroxide good 5% chromic acid good 6. Usage Method The product is of appropriate thickness,good mixedness and reliable quality,according with the current technology standard of anticorrosive engineering of furan resin CECS 01:1988,the construction and check-accept standard of building anticorrosive engineering GB 50212-91,and the anticorrosive design standard of industrial buildings GB 50046-95. 7. Storage and Package (stored in the ventilated and dry place) The period of validity of YJ furan resin is one year(30-250KG/barrel), the period of validity of clay powder is one year(25-50KG/bag)The period of validity of mortar powder is one year (25-50KG/bag), the period of validity of glass powder is one year (25-50KG/bag)