YG-30 Verankerung Drilling Rig

1. Application YG-30 construction drilling rig is used for drilling anchor holes in deep base pit of high building, anchor and reinforce side-slope for water conservatory project, water power station project, railways and highways . Especially used for drilling anchor holes in high position side-slope protection and drainage holes. 2. Features 1) YG-30 drilling rig is a full hydraulic operated top drive power head drill. It is composed of main set, control panel and pump which are connected together with flexible joint. So it features simple in structure, good disassembility and convenient to mount and transport. 2) Operating drill through the centralized control panel ensures assure safety operation and on-site cleanliness. 3) Transmission, built in the top drive power head, has two speed range high and low. It can meet the requirements of both DTH hammer drilling and carbide bit drilling. 4) Hydraulic part is an international famous brand product which ensures drilling rig's high reliability and permanence stability. 3. Specifications 1) Hole depth 40-30 m 2) Hole diameter Ø80-130 mm 3) Drilling rod Diameter×Length Ø50×1500 mm Ø73×1500 mm 4) Hole angle range 0-360° 5) Output speed of top drive power head 24 -114 r/min 6) Output torque of top drive power head 1500 Nm 7) Feeding stroke of top drive power head 1800 mm 8) Maximum lifting capacity of top drive power head 30 kN Maximum thrust force of top drive power head 15 kN 9) Electromotor power 15 kW 10) Weight approx. 550 kg 11) Overall dimension 2700×1150×1400 mm