YCB3 (DPN) Ministromunterbrecher

YCB3(DPN) is applicable to protect line-conductor against overload, and short circuit of small sealed motors. It is main for protection of circuits with AC 220V and 50Hz/60Hz, and for unfrequent conversion under normal conditions as well. Its action can be up to two poles with its only one pole volume and be used as a leakage breaker by assembling with leakage. It is produced as IEC60898. Working condition: 1.The ambient temperature should not be higher than +40C and not lower than -5C and the average temp. of 24 hours should not exceed +35C 2.The altitude should not higher than 2000m 3.The atmospheric relative humidity should not exceed 50% when the highest ambient temperature is +40C,higher humidity maybe allowed at lower temperature.Take measures to solve the dews on the breakers caused by the temperature variation. 4.Pollution grade:2 5.Installation type:II and III,controller and auxiliary circuit Structure feature YCB3(DPN) miniature circuit breaker has compact structure in the width of 18mm,it has two pole (P+N),which is specially suitable for household and derive leakage circuit breaker.The insulation case is installed with contact system,arching-extinguish system,sour-link rapid move framework and thermal-electromagnetic release,which is released to different trip current. Specification 1.Main technical data CurveRated current (A)PoleRated voltage (V)Breaking capacity (A)B/C/D3.6.10.16.20.25.321P+N220/240VAC4500 2.Overload protection characteristics No.TypeInitialIirTesting timeResult1All valueCold1.13Int≥1hNon-tripping2All valueFollowing 11.45Int1hTripping3All valueCold2.55In1st60sTripping4CCold5Int≥0.1sNon-trippingD10In5CCold10Int0.1sTrippingD14In DimensionPole number1PLength80Width18Height76