X-ray Gepäck-Scanner-Maschine ST-8065

x-ray baggge scanner machine ST-8065 FEATURE: 1.ALARM BY SOUNDS & LIGHT:ALARM BY SOUNDS AND LIGHT WHEN CONFORM TO CONDITION. 2.NETWORK INTERFACECOULD BE CONNECT LOCAL AREA NETWORK AND SUPPORT MULTI-TERMINAL CHECK BAGGAGE AT SAME TIMES 3.SAFETY RAYTRANSMIT RAY UNDER AUTOMATIC CONTROL, AVOIDS THE MISS 4.TURN OFF BY A KEY CONTROLTURN OFF THE MACHINE ONLY NEED ONE STEPREVOLVES THE KEY. THE EQUIPMENT AUTOMATIC SECURITY CLOSE-DOWN, DOES NOT NEED COMPLEX MANY STEPS, IS SIMPLER. 5.EAGLE-EYECOULD BE EXPEDIENTLY OBSERVING ENLARGEMENT AREA. 6.ESTIMATE MALFUNCTION BY SELFAUTOMATIC ESTIMATE MALFUNCTION AND PROMPT MESSAGE, HELPFUL FOR THE MAINTENANCE. TECHNICAL DATA: TUNNEL SIZE:800W×650HMM CONVEYOR SPEED:0.2 M/S CONVEYOR MAX LOAD:200 KG SINGLE INSPECTION DOSAGE< 1.5µGY WIRE RESOLUTION: 0.1MM METAL LINE STEEL PENETRATION:30MM ARMOR PLATE FILM SAFETY:FOR ISO 1600 MAXIMUM LEAKAGE RADIATION<0.05µGY/H X-RAY GENERATOR: ORIENTATION: VERTICALLY UPWARD TUBE CURRENT:0.4 0.7MAADJUSTABLE ANODE VOLTAGE:100 160 KV(ADJUSTABLE ANGLE:60° GENERATOR COOLING/WORKING PERIODS SEALED OIL BATH WITH FORCED AIR/100 IMAGE PERFORMANCE SYSTEM: X-RAY SENSOR: L TYPE PHOTO-DIODE ARRAY DETECTOR, 12BIT MONITOR:HIGH RESOLUTION 17INCH COLOR LCD DISPLAY COLOR QUALITY:24 BIT REAL COLORS EDGE ENHANCEMENT:OBJECT CONTOUR EDGE IS MORE DISTINCT SUPER IMAGE ENHANCEMENT:IMAGE DETAIL IS MORE DISTINCT HIGH PENETRATE STRENGTH DISPLAY:INCREASE BRIGHTNESS OF DARK AREA IN IMAGE TO DISPLAY OBJECT WHICH IS BEHIND HIGH ABSORPTIVITY MASS DISTINCTLY LOW PENETRATE STRENGTH DISPLAY: INCREASE CONTRAST OF LOW ABSORPTIVITY MASS (EASY TO PENETRATE) TO DISPLAY IT DISTINCTLY MAGNIFIER:FUNCTION OF PARTIAL ENLARGEMENT BRIGHTENING/DIMMING: INCREASE BRIGHTNESS OF IMAGE/DECREASE BRICHTNESS OF IMAGE IMAGE RECURRENCE:DISPLAY PREVIOUS TWENTY IMAGES AND PROCESS ANY ONE OF THEM IMAGE RESTORATION:RESTORE IMAGE TO INITIAL STATUS AT THE TIME OF STOPPING CONVEYOR IMAGE STORING: REAL TIME STORE ANY IMAGE AND PROCESS IT IN OPERATION STATUS MULTI-ENERGY FUNCTION: MULTI-ENERGY COLOR:DISPLAY ORGANIC MATERIAL FOR ORANGE, DISPLAY INORGANIC MATERIAL FOR BLUE, AND DISPLAY MIXTURE FOR GREEN HIGH ENERGY/LOW ENERCY:SWITCH TO DISPLAY TWO ENERGY TYPE, HIGH ENERGY STANDS FOR METAL ETC., LOW ENERGE STANDS FOR NONMETALLIC AUXILIAY FUNCTION FOR DRUGS & EXPLOSIVES: HELP TO DETECT SUCH DANGEROUS MATERIAL AS DRUGS & EXPLOSIVES ETC. AUDIBLE & VISIBLE ALARM: GIVE SOUND AND VISIBLE SIGNAL WHEN CONFORMING TO CONDITION OPERATING ENVIRONMENT: STORAGE TEMPERATURE: -20ºC TO 60ºC OPERATING TEMPERATURE: 0ºC TO 45ºC RELATIVE HUMIDITY:20 TO 95% NON-CONDENSING SYSTEM POWER:220 VAC (±10%) 50±3HZ POWER WASTAGE 1.0 KW (MAX) NOISE<65DB