Wp-Terminal drücken
Cecilia Liang
Kontaktperson
Basisdaten
| Ort der Herkunft | Zhejiang China (Mainland) |
|---|---|
| Marke | SJ |
| Modell-Nummer | WP2-30 |
1. Standard atmospheric conditionWp Push Terminal Unless otherwise specified, the standard range of atmospheric conditions for making measurements and tests are as follows Ambient temperature15 to 35 Relative humidity 25% to 80% Air pressure 86kPa to 106kPa If there is any doubt about the results, measurements shall be made within the following limits Ambient temperature20 2 Relative humidity 60% to 70% Air pressure 86kPa to 106kPa Applicable wire AWG 1624 Operating temperature range1065 Storage temperature range 2075 2. Mechanical characteristics 2.1 Operating forcePush plate force shall be measured by using a gauge of standard dimensions. 2.2 Lead wire hold force This test shall consist of AWG#20 copper wire of deeply inserted operation. 2.3 Input hole 2.0 mm MIN. 2.4 Terminalstrength A static load of 29.4N3Kgfshall be applied to the terminals for 10 seconds in any direction.The terminal shall not be excessive looseness from the housing.
Lieferbedingungen und Verpackung
Packaging Detail: There are ten plastic boxes in one ctn,every plastic box have 50pcs,so the package is 500pcs\ctn,the standard of measurement is 39*31*39. Delivery Detail: ONE WEEK OR TWO WEEKS
Hafen: NINGBO\SHANGHAI
Zahlungsbedingungen
Letter of credit
Telegraphic transfer
-
Zahlungsarten
Wir akzeptieren:
