Wireless Infrarot-Temperatursensor

Wireless infrared temperature sensor Features CT-S infrared temperature testers are integrated. Sensors, optical systems and electronic circuitcluster in the stainless shells;it is easy for installation, the standard screw on the stainless steel shells can be quickly connected with the parts installed. In addition,it also has different models of selected parts (e.g. blow protective housings, 90-degree adjustable installation supports, 3-dimension adjustable installation supports, special purpose digital control instruments, etc) to meet different requirements. Specifications Basic performance Protection IP65(NEMA-4) Ambient temperature 0 60°C Storage temperature -20 80°C Relative humidity 10-95% (NO dews) Material Stainless steel Size 106mm * Φ20mm (length * diameter) Cable length 1m (standard), 3m, 15m and particular specifications (customized) Electric parameters Operating power 24V DC Max current 20mA Output signals 0-5V linear, 10mV/°C Measurement parameters Spectrum range 8 14 μm Temperature range 0 500 °C Optical resolution 15:1 Adapting time 300ms (95%) Measurement Accuracy ±1% or ±1.5°C% of the measuring value, and the maximum value (environment temperature: 23°C±5) Repeated accuracy ±0.5% or ±1°C% of the measuring value, and the maximum value (environment temperature: 23°C±5) Launch rate 0.95 fixed (coordinates with special purpose digital display controllers to be able to modify online launch rates) Installation distance and measuring size The precision optical lens and optical focus design make optical diameter of the temperature testers within 100mm away as 13mm, and then the optical spot sizes will become greater with the change in the distance, e.g. the optical spot diameter at 1.2m away is 80mm. ratio of the temperature tester to the size of the optical size is also called optical resolution. The optical resolution of CT-S is 15:1, and the corresponding optical spot sizes can be calculated by the ratio as 15:1 of the distance to optical spot sizes. CT-S digital display controller Features ·Accurately display the analog signals of CT-S sensors ·Specific parameters can be modified on line with regard to the launch rates of CT-S sensors ·At most three groups of alarm output ·Control output includes: relays, solid relays, current and voltage signals, et Setting CT-S sensor launch rates As the tested materials are different in quality, their launch rates are also different, usually by 0-1. For most of the applications, the launch rate of the infrared sensor is fixed at 0.95, but as the tested materials are different, there must be some errors, and after the coordination with the application of the specific controllers, the communication between the instruments and sensors can modify the launch rates on line so that the measuring accuracy will be further improved. Table of commonly used launch rates Materials Launch rate Material Launch rate Metal Aluminum Polishing 0.04-0.06 Non metal Quartz 0.95 Anode oxidation 0.55 Bitumen 0.95 Oxidation 0.11-0.25 Paper 0.7-0.9 Copper Polishing 0.02-0.05 Concrete 0.92 Non oxidation 0.2 Water, icy water 0.95 Oxidation 0-0.88 Gypsum 0.8-0.9 Steel Polishing plate 0.1 Skin 0.98 Flat plate 0.4-0.6 Carbon 0.95 Tungsten 0.05 Paint 0.8-0.98 Nickel Electroplated polishing 0.05 Soil 0.9-0.98 Electroplated non polishing 0.11 Rubber 0.95 Oxidation 0.3-0.5 Ceramic 0.93 Lead Polishing 0.05-0.07 Wood 0.93 Coarse 0.4 Ice 0.98 Oxidation 0.3-0.6 Fiber plates 0.95 Zinc No oxidation 0.05 Carbon black 0.96 Galvanized iron plates 0.25 Sand 0.96