WIRELESS HD-Hub mit VGA (WHDI AMINMON)

Introduce Multi – Ports is Wireless High-Definition interface which enable wireless connectivity of any uncompressed HD video and Audio between an HD source device and an HD display source device. Specification l Supporting: HDMI 1.3 standard; WHDI 1.0 standard; HDCP 1.2 protocols l Supports any uncompressed video resolutions including TV :1080p, 720p, 1080i,576i, 576p, 480p, 480i PC:SVGA[800X600],XGA[1024X768],SXGA[1280X1024] l Audio I2S: Up to eight PCM channnels SPDIF: Including AC-3, DTS, DTS HD, Dolby 5.1, 7.1,Digital l MIMO technology using a 5GHZ unlicensed band and a 20MHz or 40MHz bandwidth l Maximum 12dBm transmisission power l Operating Frequency: 5.1GHz - 5.9 GHz l Image transmission distance up to 30 metres without barrier between Transmitter and Receiver l Less than 1 millisecond latency l Input Voltage: 100 -240v AC mains, 5V 2A DC out l Interface TX:1X HDMI loop out, 1 x DC in, 1 x IR out, 1 x MINI USB B , 1 x VGA audio, Option [ 1 x HDMI in, 1 x VGA in or 1 x HDMI in + 1 x VGA in ] Features l Designed to connect Blue-ray / DVD players, STBs, game consoles, PCs and HD cameras to projectors, LCDs and plasmas through wireless transmission l Sharing High Definition content among all devices in full home coverage, through walls, no line of sight required l Hassle-free, low-cost installation, eliminating unsightly cables l 4pcs LEDs & one Push Button One push Button for network matchingTwo LEDs connected to application MCU to display link status:On start-up to video connected – blinking On video connected – On Power off/ No video input – Off Another LEDs for input alternativeVGA input option – On HDMI input option – On l Professional Stand-alone, Plug & Play WHDI Dongles HDMI to HDMIHDMI/VGA to HDMI/VGAl Power Consumption in full operation 8.5Watt – 1080 P 8.0Watt – 720 P l Size: 160x95x25 (mm) l Supported VGA loop, HDMI loop Application l Supported CEC, EEDID, Reliable Messaging, info frames, HDCP 2.0/1.2, USB Support, USB FW update l PC, Education, Projector, home Regulation l The product should pass internal FCC, ETSI regulation test. l Product is designed to pass RoHS 2PVC-free/ BFR-free designESD - ESD protection; 8KV contact and air discharge to input pin or antenna, with no damage, degradation of performance, or change of characteristics.CE