Windel Rohstoff

The absorbent pad is at the core of the diaper. It is held in place by nonwoven fabric sheets that form the body of the diaper. Nonwoven fabrics are different from traditional fabrics because of the way they are made. Traditional fabrics are made by weaving together fibers of silk, cotton, polyester, wool, etc. to create an interlocking network of fiber loops. Nonwovens are typically made from plastic resins, such as nylon, polyester, polyethylene, or polypropylene, and are assembled by mechanically, chemically, or thermally interlocking the plastic fibers. There are two primary methods of assembling nonwovens, the wet laid process and the dry laid process. A dry laid process, such as the "meltblown" method, is typically used to make nonwoven diaper fabrics. In this method the plastic resin is melted and extruded, or forced, through tiny holes by air pressure. As the air-blown stream of fibers cools, the fibers condense onto a sheet. Heated rollers are then used to flatten the fibers and bond them together. Polypropylene is typically the material used for the permeable top sheet, while polyethylene is the resin of choice for the non-permeable back sheet.