WIDE PLUS-K1 Serie Druckmessumformer

Detailed Product Descriptionanti-overload and anti-impact ability strong,temperature drift slightly,high stability with very high measuring accuracyMain features :Anti-overload and anti-impact strong High stability: fine than 0.1% full range in every year Anti-interference ability strong: waterproof, dust-proof, vibration-proof, explosion-proof, corrosion-proof Wide applicability: the products have many kinds of models and process connection form and material, which is adaptable to various measuring field. Easy installation: reasonable product structure with small volume and weight light, can be direct installed at any position.Technical parameters :Working voltage (12.5 36) V DC Output signal (4 20) mA DC (analog, two wire system) Measuring scope relative pressure: max. 0 60 MPa min. 0 1.6 KPa Absolute pressure: max. 0 60 MPa min. 0 20 KPa Negative relative pressure 0.1 MPa 1 MPa Accuracy: accuracy grade: 0.1 grade, 0.2 grade, 0.5 grade Temperature influence: ±0.15%FS/10 Stability: fine than 0.1%FS/year Position influence: the installation position does not affect zero point Permission temperature normal working temperature: -20 70 Membrane: -20 80 (short-time may reached 130) Storage temperature: -20 80 High-low temperature type: -65 150 10 200 10 350 Explosion-proof grade isolated explosion type ExdIIBT5 or ExdIICT6 intrinsic safety type ExibIICT6 or ExiaIICT6 Protection grade IP67 A part of material contacted with measured medium Process connector: 316 L/304/1Gr18Ni9Ti stainless steel /Hutchinson Alloy C Seal element: fluorine rubber/Nitrile rubber/PTEE/full sealing weld Lead-out mode of wiring may be lead-out from any outlet according to requirement, it is advised to use min.φ7.5 industrial cable as lead so that it is sealed. Lead-out joint selected universal cable joint M20×1.5, without lead end should be sealed with terminal cover. Adjustment scope adjustment scope for zero point: ±5% Adjustment scope for full range: ±20%