Wickelmaschine DM-4H

Features: The computer controller is adopted the latest synchronization with the coupling-type cable, very precious, it doesn’t block machine when cabling in high speed.Super intelligent, self-detection, including setting errors, speeding up and calibration of the speed.Using the latest switching power supplies, high stability. With the cursor scale function, it can easily measure the winding width and the winding starting point.In the operation, the motor spindle speed can be changed; and the cable devices will be synchronization with the coupling.When spindle motor is started, the rate of climb time can be changed freely with the model feature.With cable speed detection function that can reduce the spindle speed to the most stable state.RPM operating speed and production capacity can automatically display when in or off operation.Large memory capacity of 1000 steps.A group of RS-485 can interface with personal computers for the management of routing information in one time.Braking time and the number options can be settled depending on mechanical characteristics, diameter size and speed, for one, two or three. VoltageSingle phase 220V/50HZ Power400W Spindle No. 4pcs MAX Winding Width100MM(Can skip automatically) MIN Resolution0.001MM MAX Frame Dia.100MM Thread Dia.0.025-0.6MM MAX Speed. 0-6000r/min, Percent speed regulation. Winding Storage.999sets Counter No. 0-99999 laps or 0-9999.9 Counter Resolution0.1 lap. Weight35kg. Dimension1.0m×0.40m×1.0m. Notes: The MAX. speed could not be up than 4000r/min at the first 30days using. ================================================================