Wellen Fiber (für die Beton)

Wave fiber is a kind of substitute product of steel fiber, and also has some specialties of the thin fiber. Compared with the steel fiber, it has the special features of anti-corrosion, anti-dispersion, anti-operation, no damage to the mixing equipment, etcThe Application of Wave fiber1. For culverts support, natural terrain revetment and other support engineering, owe to its high anti-bending and tensile strength2.For the impounding reservoirs, low pressure-water pipe and the anti-infiltration of the basement, because of its high performance of anti-crack3. For the position of high-speed running water, e.g., the spillway and sluice board of the Hydraulic and Hydro-Power Engineering, because of its high performance of anti-impact and anti-abrasion4.Better for concrete engineering in the condition of being corroded by the seawater, because it is made of synthetic resin with the specialty of steel fiber5. For bearing the live load, such as bridge of the highway, railway and other engineering, because its high performance of fracture toughness, anti-stretch, anti-fatigue etcCompare with the Steel Fiber in EconomyWave fiber is made according to the function of the steel fiber. Its shape of cross section and specific surface area are similar to the steel fiber, so when compare the economy of the two kind of material, in the condition of the same volume, Wave fiber is lighter than Steel-Fiber. As a result, using Wave fiber can reduce the cost greatly.The Physicochemical Properties of Wave fiberTB-Wave fiber-25SMaterial Formsynthetic resinTypewavinessColorblack; whiteIdentical Diameter mm0.8±0.2(black);0.6±0.2(white)Lengthmm25±2(black);40±2(white)Tensile StrengthMPa≥350Note:The range of length 3-50mm, and according to the your demand