weit Infrarot-Heizung-LED Spiegel

Product SpecificationOperating voltage: AC 220 240V,50HzUser temperature setting range: 45 85 °CTemperature Control Range: Set the temperature to below the set temperature of 10 °C Power consumption: 220 260W Temperature Control Range: Set the temperature to below the set temperature of 10 °CPower consumption: 220 260W Plug-in the products, power on the switch, so that product electricity is connected.If the product power is on, the temperature display window will display the internal heating system temperature of far-infrared heating LED mirror, the user can manually set to desire temperature (factory default temperature is 85°C), When the product power is on, the LED backlight will automatically switch on(factory default is turned on backlight), users can also manually switch backlighting, every time 1 press the backlight button will take turns to switch lights or open the backlight alternately, shown in Figure 1;When first power on the product, it will be based on the factory default (factory default setting is 85 °C), user can set the heating temperature of the actual need afterward, every time 1 press the button increases the temperature will rise 1 °C, each according to button will reduce the temperature by 1 °C, press and hold will continue to increase every 0.3 seconds (or decrease) 1 °C, the highest user set temperature is 85 °C, the lowest user set temperature of 45 °C, when the temperature is set to enter state temperature display Window will be flashing, set up automatically exit after setting mode; it will display back the actual temperature.