Wasserdichte LED-Netzteil

Waterproof LED Power Supply SUNSHINE Waterproof transformer adopt top-grade aluminum alloy as shell material, adelomorphic heat dispassion design, exquisite and fashionable, we give full consideration on perfectcombination by efficiency and appearance, All-wave heat dispassion helps our products work in a low temperature within 26 centigrade degree. Adopt PWM technical design, ensure products with excellent performance, complete protection, Enable the customer relived to use it .Choose up-market electronic component, make products with real high quality from inside to outside .Product power efficiency >85%, all passed EMC and LVC test, CE and Rohs approval, lower power consumption, better environment protection.Omni bearing waterproof design, IP67Detailed product Description1. Available 200W, 150W, 100W, 60W, 50W, 40W, 30W2. Voltage: 12V /24VFollowing is 100W Specification:SPECIFICATIONMODEL12V100W 24V100WOUTPUTDC VOLTAGE 12V24VRATED CURRENT8.3A 4.1ACURRENT RANGE0 8.3A 0 4.15ARATED POWER100W 100W NOTE.2RIPPLE & NOISE (max.)150mV150mVNOTE.3VOLTAGE TOLERANCE±4%±2%SETUP, RISE TIME80ms/220VACHOLD UP TIME (Typ.)60ms/220VACINPUTVOLTAGE RANGE170 250VACFREQUENCY RANGE50 60HzPOWER FACTOR (Typ.)PF>0.6/220VACEFFICIENCY (Typ.)77%80%81%AC CURRENT (Typ.)0.95A/220VACINRUSH CURRENT (Typ.)COLD START 40A/220VACPROTECTIONShort circuitProtection type : recovers automatically after fault condition is removedOverloadoverload protected @ 145-160% above peak ratingOver temperatureProtection type : Shut down o/p voltage, re-power on to recoverENVIRONMENTWORKING TEMP.-30 +50°C (Refer to output load derating curve)WORKING HUMIDITY20 99% RH non-condensing(Waterproof)STORAGE TEMP., HUMID IT Y-40 +80°C , 10 99% RHSAFETY & EMCSAFETY STANDARDSCE Mark (LVD) , IP67WITHSTAND VOLTAGEI/P-O/P:1.5KVAC I/P-GND:1.5KVACEMC Test StandardsEN55015:2006 ; EN61547:1995+A1:2000 ; EN61000-3-2:2006 ;EN61000-3-3:1995+A2:2005 ; EN61347-1:2001 ; EN61347-2-13:2006NOTE1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 1 0 uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.