Wafer magnetische Durchflussmesser

Flow meter Model: WP-EMF-C Installation modes:Wafer integrated type Language selection: Chinese and English Aperture: DN40 DN200 Electrode material: 316, Hb, Hc, Ti, Ta Inside lining material: PFA, F46 Medium: conducting liquid (include solid liquid two-phase body) Accuracy grade: 0.2%, 0.5%, 1.0% (DN10 DN200) Medium conductivity:>5μS/cm (water > 20μs/cm) Excitation mode: LF square wave excitation, HF square wave excitation (apply to serosity measurement) Flow velocity scope: 0.1 15m/s (flow unit selectable) Connection flange: GB/T9119-2000 Medium temperature: -10 +60°C, Rated pressure: 1.0Mpa 4.0Mpa (divided according to aperture, refer to type spectrum table Protection grade: IP67 Output signal: 4 20mA output, frequency/pulse, alarm Hollow tube measurement: measuring hollow tube function without electrodes, continuous measurements, fix value alarm Record function: record of power-fail time, automatic record of power break time of instrument system, make up flow left out (for option) Infrared remote control: infrared hand-hold operational keyboard (for option) Application: Acid, alkali, water supply and drainage, food, paper pulp, ore pulp etc. Display: Flow rate, flow, percentage, integrating flow, fault alarm etc. Supply power: 220V AC, 24V DC Mark of explosion proof: Exd ΙΙ CT6 (for option)