Vorgeformte guy Griffe

The preformed guy tension set is usedin riveting the guy wirings on the pole, tower or microwave tower. It canreplace the daily wedge tension set in riveting. Thestructure of the Preformed Tension Set is particular, and the pipe structureformed by the two legs of the preformed line would produce a great holdingstrength. The novel structure and exact design all contribute to thereliability of the conductor tension set. Trait: -The tension clamp is ableto endure the high intension and grip strength. The grip strength of clamp isnot less than 95% CUTS. -The clamp distributing thestress uniformity, improved ability of asiesmatic without any damage onconductor. So that extended the usinglife of the conductor. - It bears the excellence of easy installation and construction, Shorted the working time. Operatedthis clamp by one person and need the special tool. - Easy to guarantee thequality of installation, checked by optic view without special training -Prefect corrosion resistance; the same material withconductor promises that the clamp owned excellent ability of electrochemistrycorrosion resistance. - Using the theft-proof ringto solve the theft problem. Note: -Due to the special construction of the clamp,theclamp only can be used once after enduring the stress. -When purchase products or place order, the specification and type of conductorshould be provided. -Joint is not allowed on the clamp, but allowed on theconductor beside the clamp -The Direction of outer layer should be thesame, the standard of clamp is right hand lay. If need the left lay, pleasedeclare.