Vollautomatische Heißfolienprägen und Stanzen M

1. Transmission of main machine adopts the imported A/C frequency converter, startup and stop of the machine are controlled by imported air clutch. 2. Running of the whole machine is controlled by PLC. Interface touch-screen for monitoring machine running condition, trouble indications and their corresponding shooting ways. This is more operator-friendly. 3. Independent temperature control to each heating zone, makes temperature operation of the machine be more equal and stable. Function of timing pre-heating can enhance working efficiency greatly. 4. This machine adopts imported servo motor, foil feeding device. Specifications:Model TYM780 Max. sheet size (mm) 780×540 Min. sheet size (mm) 310×210 Paper range (g/m2) 902000 Paper thickness (mm) ≤1.5 Min. grip size(mm) 6 Max. stamping size (mm) 750×510 Max. foil pulling distance (mm) Longitudinal : 520 Transversal: 750 Heating capacity (kw) 9 Zones individually heated 6 zones Max. die cutting size (mm) 750×520 Inside chase size (mm) 780×530 Max. working pressure (N) 120×104 Max. stamping speed (s/h) 4000 Max. Mechanical speed (s/h) 4500 Foil pulling shafts 5 (3 in longitudinal and 2 in transversal) Foil specification(mm) Min. foil width(mm): 40 Max. foil width(mm):640 Max. foil diameter(mm): up shelf Φ160 down shelf Φ210 Diameter of foil core (mm/inch) 25/1" or 76/3" Max. feeder pile height (mm)950 Max. collect pile height (mm)700 Total capacity (KW) 25 Machine weight(kg) 7500 Overall machine dimensions(mm) 4000×3600×2100